2 Replies Latest reply on Apr 16, 2009 11:59 AM by AnnaG

    ...file not found.

    AnnaG
      ...File not  found.
      This message is recorded in the  Event Log under IAANTmon - Intel(R) Matrix Storage Event Monitor, and I receive  several each time I boot - noted as follows:
      RAID Plug-In Version:  8.8.0.1009
      Language Resource Version of the RAID Plug-In: File not  found
      Create Volume Wizard Version:  8.8.0.1009
      Language Resource Version of the Create Volume Wizard: File not  found
      Create Volume from Existing Hard  Drive Wizard Version: 8.8.0.1009
      Language Resource Version of the Create  Volume from Existing Hard Drive Wizard: File not found
      Modify Volume Wizard Version:  8.8.0.1009
      Language Resource Version of the Modify Volume Wizard: File not  found
      Delete Volume Wizard Version:  8.8.0.1009
      Language Resource Version of the Delete Volume Wizard: File not  found
      Event Monitor User Notification Tool  Version: 8.8.0.1009
      Language Resource Version of the Event Monitor User  Notification Tool: File not found
      Like most PC users, I prefer a system that runs at PEAK PERFORMANCE, and these "File not found" issues make me highly suspicious  that Intel's RAID 1 software is not performing at its  peak. 
      The manual states nothing in this  regard - any thoughts?
      Thank you.
      AnnaG
      P.S.  Below it the actual IAANTmon  log...
      Event Source: IAANTmon
      Event  Category: None
      Event ID: 7500
      Date: 4/14/2009
      Time: 8:15:17 PM
      User:  N/A
      Computer: ANNAGSPC-AC9EBD
      Description:
      Intel RAID Controller:  Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
      Number of Serial ATA ports:  4
      RAID Option ROM Version: 6.0.0.1022
      Driver Version: 8.8.0.1009
      RAID  Plug-In Version: 8.8.0.1009
      Language Resource Version of the RAID Plug-In:  File not found
      Create Volume Wizard Version: 8.8.0.1009
      Language Resource  Version of the Create Volume Wizard: File not found
      Create Volume from  Existing Hard Drive Wizard Version: 8.8.0.1009
      Language Resource Version of  the Create Volume from Existing Hard Drive Wizard: File not found
      Modify  Volume Wizard Version: 8.8.0.1009
      Language Resource Version of the Modify  Volume Wizard: File not found
      Delete Volume Wizard Version:  8.8.0.1009
      Language Resource Version of the Delete Volume Wizard: File not  found
      ISDI Library Version: 8.8.0.1009
      Event Monitor User Notification  Tool Version: 8.8.0.1009
      Language Resource Version of the Event Monitor User  Notification Tool: File not found
      Event Monitor Version:  8.8.0.1009
      Array_0000
      Status: No active migrations
      Hard Drive Data  Cache Enabled: Yes
      Size: 596.1 GB
      Free Space: 0 GB
      Number of Hard  Drives: 2
      Hard Drive Member 1: WDC WD3200KS
      Hard Drive Member 2: WDC  WD3200AAKS
      Number of Volumes: 1
      Volume Member 1:  Volume_0000
      Volume_0000
      Status: Normal
      System Volume: Yes
      Volume  Write-Back Cache Enabled: No
      RAID Level: RAID 1 (mirroring)
      Size: 298  GB
      Physical Sector Size: 512 Bytes
      Logical Sector Size: 512  Bytes
      Number of Hard Drives: 2
      Hard Drive Member 1: WDC WD3200KS
      Hard  Drive Member 2: WDC WD3200AAKS
      Parent Array: Array_0000
      Hard  Drive 0
      Usage: Array member
      Status: Normal
      Device Port: 0
      Device  Port Location: Internal
      Current Serial ATA Transfer Mode: Generation  2
      Model: WDC WD3200KS
      Serial Number: WD-XX
      Firmware: 21.00M21
      Native  Command Queuing Support: Yes
      Hard Drive Data Cache Enabled: Yes
      Size: 298  GB
      Physical Sector Size: 512 Bytes
      Logical Sector Size: 512  Bytes
      Number of Volumes: 1
      Volume Member 1:  Volume_0000
      Parent Array: Array_0000
      Hard Drive 1
      Usage: Array  member
      Status: Normal
      Device Port: 1
      Device Port Location:  Internal
      Current Serial ATA Transfer Mode: Generation 2
      Model: WDC  WD3200AAKS
      Serial Number: WD-XX
      Firmware: 01.03E01
      Native Command  Queuing Support: Yes
      Hard Drive Data Cache Enabled: Yes
      Size: 298  GB
      Physical Sector Size: 512 Bytes
      Logical Sector Size: 512  Bytes
      Number of Volumes: 1
      Volume Member 1: Volume_0000
      Parent Array:  Array_0000


        • 1. Re: ...file not found.
          Elizabeth

          Hi, AnnaG. I offered a suggestion in your other thread but am pasting it here too so you can see it. :)

          ======================

           

          Those "Language resource file missing" errors look like minor errors related to language files for the console - like it can't find the language files (the files that translate all the strings into the supported languages). The language files wouldn't impact the performance of the RAID software.

           

          What I'd suggest to try to resolve it is to uninstall the application (it should not uninstall the driver, just the minor apps like the console, etc.) and reinstall it.

           

          I haven't seen the error before so am not sure why it would occur; I'll see if I can find out. Did you install the English version or multi-language version? Did the OS language change after install? Could some of the language files have gone missing?

          • 2. Re: ...file not found.
            AnnaG

            Thank you, Elizabeth - I found it first and replied there in detail.