Update the firmware if it is not already up to date.
- Unplug any add-in cards
- Unplug additional processors and memory DIMMs until there is only one processor and one DIMM installed.
- Install latest firmware from http://downloadcenter.intel.com
If that is not an option then...
First, look at the System Event Log for the main board
Also, check out this guide for troubleshooting boot issues. It does not sound like this is normal.
Message was edited by: Jason
I'm using the S1200KPR.
I do not have any plug-in cards installed. The firmware is also the latest.
I've tried to use the System Event Log-Tool, but its screen was blank after it started.
Does this mainboard have the HW to support its operation?
It would be good if someone could explain why EB "calling legacy boot ROMs" is displayed by
the BIOS when I do not have any plug-in cards installed.
i quote your "During POST the splash screen always shows EB and then hangs from time to time"
i am using the S1200KP (1st Revision) and i had the same problem on my first Windows Home Server installs.
I found out that the cool-pit was my USB DVD-RW. when using it the board was stuck during post at the EB phase. When i unplugged the extrernal USB DVD-RW all was running smothly.
Another way to solve this if you really need the external DVD-RW drive attached you must populate the drive with a disk. Then your post sequence will go through as normal....
Probably it is a BIOS related glitch but no-one cares to fix it...