4 Replies Latest reply on Sep 18, 2012 11:50 AM by parsec

    Acceleration using 20Gb 311 SSD & RST does not survive a reboot


      I can accelerate my system using RST but when I subsequently reboot it, it will hang indefinitely until I interrupt the boot process with a CTRL-I and reconfigure the storage to remove the acceleration and return the SSD & HDD to a non-raid configuration. Booting after that works fine until I re-accelerate things.


      Intel SSD Toolbox - v3.0.3 reports that the SSD (Intel SSD 311 Series 20Gb) is fine and that the firmware is up to date.

      Intel RST is used.


      Any suggestions about how I might fix or at least troubleshoot this?


      System is 64-bit Windows 7 Enterprise with an Intel Core i7 2600K (all stock settings) on a MSI Z68A-GD80 (B3) LGA 1155 Intel Z68 motherboard (MS-7672) with v17.5 BIOS and 16Gb of dual-channel DDR3 memory.

      HDD is a WD Caviar Black WDBAAZ0020HNC-NRSN 2TB 7200 RPM 32MB Cache SATA