I have a couple D2700DC motherboards that I'm trying to get into service. The application requires that the unit returns to 'Power ON' after power failure. The motherboard doesn't follow the bios settings when power is returned.
I have tried:
- each new bios as it becomes available.
- creating my own bios image with the Integrator Toolkit (wherein I set the 'After Power Failure' flag to the mode I want)
Each attempt ends without success. It appears that it just doesn't work.
Can someone nudge the devs and have them test/repair this?
Clear the CMOS battery for 30 minutes. Reboot the system and in the BIOS setup utility, press <F9> to restore BIOS to defaults. Proceed with a BIOS recovery test. Latest BIOS version can be downloaded from the following web site:
Instructions can be found at this link:
Ensure you have followed a clean installation of the Operating System using the latest drivers from our website.
If the issue persists, replace the motherboards under warranty.