0 Replies Latest reply on Jul 12, 2012 2:56 PM by Genie

    Intel(R) HD Graphics 3000 - No Signal

    Genie

      Hello,

       

      I'm trying to connect a ViewSonic VX2235WM to my new Intel HD 3000 video card using DVI and I get No Signal, if I leave everything the same but just replace the monitor with a Samsung SyncMaster 2233sw everythign works just fine.

       

      While the Viewsonic Monitor is connected to a working computer Moninfo outputs:

       

      Monitor

        Model name............... VX2235wm-3

        Manufacturer............. ViewSonic

        Plug and Play ID......... VSCBA1E

        Serial number............ QCZ070403165

        Manufacture date......... 2007, ISO week 4

        Filter driver............ None

        -------------------------

        EDID revision............ 1.3

        Input signal type........ Digital

        Color bit depth.......... Undefined

        Display type............. RGB color

        Screen size.............. 470 x 300 mm (22.0 in)

        Power management......... Active off/sleep

        Extension blocs.......... None

        -------------------------

        DDC/CI................... Not supported

       

      Color characteristics

        Default color space...... sRGB

        Display gamma............ 2.20

        Red chromaticity......... Rx 0.646 - Ry 0.339

        Green chromaticity....... Gx 0.290 - Gy 0.603

        Blue chromaticity........ Bx 0.145 - By 0.065

        White point (default).... Wx 0.313 - Wy 0.329

        Additional descriptors... None

       

      Timing characteristics

        Horizontal scan range.... 30-82kHz

        Vertical scan range...... 50-75Hz

        Video bandwidth.......... 170MHz

        CVT standard............. Not supported

        GTF standard............. Not supported

        Additional descriptors... None

        Preferred timing......... Yes

        Native/preferred timing.. 1680x1050p at 60Hz (16:10)

          Modeline............... "1680x1050" 146.250 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync

       

      Standard timings supported

           720 x  400p at  70Hz - IBM VGA

           640 x  480p at  60Hz - IBM VGA

           640 x  480p at  67Hz - Apple Mac II

           640 x  480p at  72Hz - VESA

           640 x  480p at  75Hz - VESA

           800 x  600p at  56Hz - VESA

           800 x  600p at  60Hz - VESA

           800 x  600p at  72Hz - VESA

           800 x  600p at  75Hz - VESA

           832 x  624p at  75Hz - Apple Mac II

          1024 x  768p at  60Hz - VESA

          1024 x  768p at  70Hz - VESA

          1024 x  768p at  75Hz - VESA

          1280 x 1024p at  75Hz - VESA

          1152 x  870p at  75Hz - Apple Mac II

          1680 x 1050p at  60Hz - VESA STD

          1600 x 1200p at  60Hz - VESA STD

          1440 x  900p at  60Hz - VESA STD

          1400 x 1050p at  60Hz - VESA STD

          1280 x 1024p at  60Hz - VESA STD

          1280 x  960p at  60Hz - VESA STD

          1152 x  864p at  75Hz - VESA STD

           640 x  400p at  70Hz - VESA STD

       

       

      Raw data

        00,FF,FF,FF,FF,FF,FF,00,5A,63,1E,BA,01,01,01,01,04,11,01,03,80,2F,1E,78,2E,75,35,A5,56,4A,9A,25,

        10,50,54,BF,EF,80,B3,00,A9,40,95,00,90,40,81,80,81,40,71,4F,31,0A,21,39,90,30,62,1A,27,40,68,B0,

        36,00,DA,28,11,00,00,1C,00,00,00,FF,00,51,43,5A,30,37,30,34,30,33,31,36,35,0A,00,00,00,FD,00,32,

        4B,1E,52,11,00,0A,20,20,20,20,20,20,00,00,00,FC,00,56,58,32,32,33,35,77,6D,2D,33,0A,20,20,00,8F

       

      If I connect the monitor using VGA it works.

       

      Any ideas what it's causing this issue?

       

      I'm using driver version 8.15.10.2761 .

       

      Thank you.