4 Replies Latest reply on Jun 29, 2012 12:38 PM by rbmorse

    DZ77GA-70K Cannot enter BIOS setup

    rbmorse

      Pressing F2 during POST results in a boot loop as soon as the "entering setup" message appears. 


      Moving the configuration jumper to the "configuration" position (pins 2 and 3) results in a message to power off and move the jumper back to the normal position.  I completed a successful BIOS update to 0045 using the express installer method.  BIOS


      Machine appears to be working fine, otherwise.  I've tried both PS/2 and USB keyboards with same results.  Any suggestions appreciated.