1 Reply Latest reply on Jun 16, 2012 5:30 AM by edwardzh

    MFS5520VI no post.

    halbeik

      So one of the modules on the IMS is not posting. According to the CMM:

      Status: OK, ON

      Under the Events tab:

      Watchdog timer expired - The server was hard reset

      BIOS FRB2 Watchdog timer expired - The server was hard reset

       

      In the Firmware section of the Settings:

      Server 1: (no post server)

        BMC Firmware   OK    1.27.1

        BMC Boot          OK    0.28

        BIOS                      unknown

       

      The post code LEDs are the following

      A= Amber

      G= Green

      X= Off

      XXAAXGXX    (with Emergency Bios jumper set to 2,3)

      AXAAGXXG  (with Emergency Bios jumper set to 1,2)

       

      If I do remove all memory modules, I do get the expected 3-beeps.

       

      Right now my attempts are at a single CPU and 3 sticks or RAM. The CPU is an Intel Xeon 5620. I will be attempting a CPU swap and see where it goes from there.

       

      Any thoughts?