i've encounered Problems there as well, tried nearly everything to exclude other Problems but the renesas Controller. here is a screenshot of the current System Setup (win8). The whole system config in detail is attached. Can someone from Intel please take a look at it. please explain why it does not work anyway! thanks in advance.
this is how I upgraded the firmware of RENESAS chip:
Information from the upgrade util...
Bus:0x02 Device:0x00 Function:0x00
This Device is uPD720200(Revision 3).
Type : 2, PageSize = 0x100, Chip Erase = 0x60
i upgraded the fw with the following command:
w200fw35.exe /SROM 0 /LOG /ADDRESS 02-00-00 /WRITE F303408.MEM CFG.INI
(see the CFG.INI attached below)
The latest USB 3.0 Renesas driver is version 188.8.131.52, please try:
I allready tried this 184.108.40.206 you submitted (which is unfortunately displayed as 220.127.116.11 after installing, whats wrong here?), with the last firmware (3034 for uPD720200) as well as the firmware before with all (other) RENESAS drivers available (i guess - found herehttp://www.computerbase.de/forum/showthread.php?t=913445Station-Drivers - Renesas/Nec). without success. i also tried every driver on win 7 32 / 64, with latest firmware for uPD720200 controller.
the symptoms are the following
.not detected devices (disks)
.filesystem detected as RAW (it is NTFS everytime)
.complete system hang/freeze when connected a device / tried to do file operations with it
.corrupted file system after trying to use a storage
.(therefore i think) files could't be "found" on the attached volume when they should be copied on the pc and so on...
sometimes it just worked directly after applying a new driver, but after a reboot it just wasn't working again.
I had this malfunctions above with every OS I tried (WIN7 32 / 64bit, WIN8.1 64). This usb 3.0 chip wasn't working from the beginning, so I am starting beeing slightly frustated as this is never (ever?) working... B:
what next? :-/