Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4762 Discussions

s5520HC raid console doesn't run

idata
Employee
2,196 Views

I have a s5520HC mainboard and I cannot run raid console. There is no information "Press to enter RAID BIOS Console"

0 Kudos
7 Replies
Edward_Z_Intel
Employee
323 Views

Which RAID card are you using? Did you disable "Quiet Boot" in BIOS?

idata
Employee
323 Views

I don't know. I've just bought mainboard S5520HC and I though that there is a raid controller in the mainboard.

the quiet boot is disabled.

0 Kudos
Edward_Z_Intel
Employee
323 Views

Well if you don't have a RAID controller you don't have the Ctrl-G prompt. If you want to use the onboard SATA ESRT2 RAID you need to enable it in BIOS first, and you'll get a Ctrl-E prompt. See the demo for details: http://www.intel.com/support/motherboards/server/sb/CS-032119.htm http://www.intel.com/support/motherboards/server/sb/CS-032119.htm

0 Kudos
idata
Employee
323 Views

I've made it. thank you very much. Unfortunatelly servers works very, very slow. I wonder if it's caused by raid (raid 1). Do you think that it is better idea to buy a raid controller or this one on motherboard is fine?

0 Kudos
Edward_Z_Intel
Employee
323 Views

Did you check this one: http://www.intel.com/support/motherboards/server/sb/CS-031086.htm Slow system response with Windows 2008 R2* or Windows 7* and embedded NIC driver

0 Kudos
idata
Employee
323 Views

I did and it helped me with NIC but the server is still slow. I think it's because of embedded raid. what is its quality? do you think an external raid controller should be consider? Or maybe raid 10 would be a good idea?

0 Kudos
Edward_Z_Intel
Employee
323 Views

How slow is that? What's the exact symptom?

Yes RAID 10 could be faster than RAID 1, but you may want to find the real bottleneck first. Also, make sure you use HDDs from the http://www.intel.com/support/motherboards/server/s5520hc/sb/CS-030220.htm Tested memory and hardware list. Also, SATA drives could be very sensitive to vibration.

0 Kudos
Reply