1 2 Previous Next 1 Reply Latest reply on Jan 14, 2009 10:13 AM by dmaber

    Remote Configuration for AMT 3.0.1 /w SCCM SP1 - <RESOLVED>

    dmaber

      Hi,

       

      My Environment:

       

       

      • SCCM 2007 SP1 running in mixed mode on Windows Server 2003 SP2 Standard
      • Enterprise Root CA on Server 2008 Enterprise
      • Purchased provisioning certificate from Verisign as per procedure.

       

       

      I've followed the 'Quick Start Install Guide for MS CfgMgr SP1 Out of Band Management Rev1_9.pdf' document to setup and configure vPro in my environment.

       

      All of the clients I have already been deployed and are running AMT 3.0.1 (hp dc7800p's mostly), they have not been provisioned previously.

       

      From the Quick Start guide I've installed the WS-Man translator which apparently is required to provision AMT clients prior to 3.2.1, it's from here I'm a little bit confused as to how I can remotely provision these machines without having to manually touch each one??

       

      SCCM clients are already pushed out and functional on all these clients so I have means of remotely configuring each machine via command line.. there's several hundred machines though so manually touching each machine isn't an option..

       

      I guess I just need the high level steps on what I need to do??   any URL's to walk through this would be greatly appreciated too!

       

      Thanks!

        1 2 Previous Next