1 Reply Latest reply on Jan 3, 2012 9:27 AM by Diego_Intel

    unable to change screen resolution from 1366x768

    ktechf

      Systems Spec:

       

      Dell Latitude E5520, i3-2310M CPU, 8GB RAM

       

      Windows 7 - 64bit

       

      I was able to installed the newer version of the Intel HD Graphics Driver (version 8.15.10.2559) but this is not  allowing me to change the resolution beyond 1366x768.

       

      Please any idea on how I can resolve this?

       

      Thanks

       

      kamal

        • 1. Re: unable to change screen resolution from 1366x768
          Diego_Intel

          Hello,

           

          I suggest you to check the troubleshooting available on this site:

           

          http://www.intel.com/support/graphics/sb/CS-022544.htm

           

          Keep  in mind that the graphics controller drivers will support just about  any video modes (within reason) that the Monitor’s EDID (Extended  Display Identification Data) claims to support, as well as modes defined  within the Video BIOS Table (VBT), plus a basic set of static modes  (mostly for monitors with no EDID):  640x480, 800x600, 1024x768,  1280x1024, and 1600x1200. Each Original Equipment Manufacturer (OEM) may  limit resolutions within the VBIOS, which is an active part of the  BIOS. Manufacturers according to their system designs and target markets  can do these changes.

           

          So,  some video resolutions may be avaialble only if you install the dicver  of the monitor connected and if the custoized driver provided by your  motherboard .manufacturer is installed