1 Reply Latest reply on Dec 18, 2011 2:15 PM by higgledy

    DH67BLB3 MB won't boot


      Hi. I am building my first system. I have everything installed but the machine won't boot. After turning the pwr switch on, the fans spin for about 10 seconds then everything turns off. I reseated the CPU, and the RAM. Double & triple checked all my connections, too.

      Any ideas what could be wrong? Here is my setup:


      • DH67BLB3
      • Western Digital Caviar Black WD5002AALX 500GB 7200 RPM SATA 6.0Gb/s 3.5"
      • Intel Core i3-2100 Sandy Bridge 3.1GHz LGA 1155 65W Dual-Core Desktop Processor Intel HD Graphics 2000
      • CORSAIR XMS 4GB 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory Model (in DIMM 1)
      • Antec Three Hundred case
      • Lite-On DVD
      • Corsair CX430 V2 PSU


      Thanks for any suggestions.


      Message was edited by: Phil Palmer added pwr supply