Graphics
Intel® graphics drivers and software, compatibility, troubleshooting, performance, and optimization
20501 Discussions

how install Lucid Virtu?

idata
Employee
2,497 Views

I just buy an ASUS P8Z68-V PRO and an GForce GTS 450 so I tried to install the lucid virtu virtualization sw but when the discrete video card is not installed it tells me it can't be installed because it needs a discrete card. Then I install the GForce card and the software tells me there is no Sandy Bridge. What is the right procedure I do to make this works?

0 Kudos
1 Solution
Allan_J_Intel1
Employee
871 Views

Hi, it seems you have a configuration problem, specifically at BIOS level.

See below for some instructions about configuring the BIOS setup:

 

1. Upon system boot, press F2 when prompted to enter BIOS setup menu.

 

2. Under Configuration -> Video, set the Integrated Graphics Device option to "Always Enable"

 

3. If you are configuring for i-Mode, please make an additional change. Under Configuration -> Video, set the Primary Video Adaptor to "Int Graphics (IGD)"

 

4. Press F10 to save settings and then press "Y to exit

If you are interested in additional information check this URL:

http://downloadmirror.intel.com/19993/eng/Lucid%20Virtu%20Users%20Guide%20v1%202%20Universal.pdf http://downloadmirror.intel.com/19993/eng/Lucid%20Virtu%20Users%20Guide%20v1%202%20Universal.pdf

Thanks

Allan.

View solution in original post

0 Kudos
4 Replies
Allan_J_Intel1
Employee
872 Views

Hi, it seems you have a configuration problem, specifically at BIOS level.

See below for some instructions about configuring the BIOS setup:

 

1. Upon system boot, press F2 when prompted to enter BIOS setup menu.

 

2. Under Configuration -> Video, set the Integrated Graphics Device option to "Always Enable"

 

3. If you are configuring for i-Mode, please make an additional change. Under Configuration -> Video, set the Primary Video Adaptor to "Int Graphics (IGD)"

 

4. Press F10 to save settings and then press "Y to exit

If you are interested in additional information check this URL:

http://downloadmirror.intel.com/19993/eng/Lucid%20Virtu%20Users%20Guide%20v1%202%20Universal.pdf http://downloadmirror.intel.com/19993/eng/Lucid%20Virtu%20Users%20Guide%20v1%202%20Universal.pdf

Thanks

Allan.

0 Kudos
idata
Employee
871 Views

Thank you very much Allan... it was more simple than I thought, now I have the lucid virtu up and running

0 Kudos
idata
Employee
871 Views

I have the same problem, but can't find the option on the BIOS

0 Kudos
idata
Employee
871 Views

Bios Setup : Configuration : Video : change to " always enable ".

0 Kudos
Reply