Power LED ( 3-Pin Connector): 1-5
Power Switch (2-Pin Connector): 11-13
Reset Switch (2-Pin Connector): 15-17
HDD LED (2-Pin Connector): 7-9
Thank you very much for the quick response. Just one more question. Which are pins 1 and 2? As seen with the board upright with the processors towards the high side and the panel connectors on the low side, are pin 1 the lower left and pin 2 the upper left pin?
There should be a small white triangle printed on the board pointing pin 1. The next pin (pin 3) is a missing pin.
just one more question, if i may: the board has a 2x24 connector for the ps. i also see a 2x8 connector. my ps only has a 2x4 connector. should i connect the 2x4 connector to the 2x8 receptacle and how?
thanks again for all the help and i hope this is useful to others with the same problems.
The spec requires a 8-pin 12V power connector for CPU. Not sure if a 4-pin 12V power connector will work or not.