9 Replies Latest reply on Aug 24, 2011 2:38 AM by millibyte

    No DVI or HDMI output - ga-z68ma-d2h-b3 intel i5 HD3000

    Skidder

      Can anyone help? I bought a Gigabyte ga-z68ma-d2h-b3 motherboard and an Intel i5 2500k (HD3000) to upgrade my old HTPC but I can't use the DVI or HDMI when Windows completes its boot.

       

      I can use hdmi and DVI to see POST & BIOS, and the Windows 7 boot graphics, but when Windows finally loads I lose signal....very frustrating and its forcing me to use my VGA connection on my TV (looks terrible).

       

      I really don't want to buy a video card as I don't have lot of room (its a Micro ATX board and I already have 2 x tuners in the PCI Express slots so its a bit crampt).

       

      I have tried all graphics drivers from both Gigabyte and Intel (old and new!), set the resolution at 800 x 600 & 1024 x 768, updated system BIOS to latest and I'm still no-where.

       

      Please help!

       

      Intel(R) HD Graphics 3000

       


      Report Date:   8/2/2011
      Report Time[hr:mm:ss]:  20:47:58
      Driver Version:   8.15.10.2418
      Operating System:  Windows 7  Service Pack 1(6.1.7601)
      Default Language:  English (Australia)
      DirectX* Version:  10.1
      Physical Memory:  3503 MB
      Minimum Graphics Memory: 64 MB
      Maximum Graphics Memory: 1559 MB
      Graphics Memory in Use:  205 MB
      Processor:   x86 Family 6 Model 42 Stepping 7
      Processor Speed:  3292 MHz
      Vendor ID:   8086
      Device ID:   0112
      Device Revision:  09

       


      *   Processor Graphics Information   *


      Processor Graphics in Use:  Intel(R) HD Graphics 3000
      Video BIOS:   2111.0
      Current Graphics Mode:  1440 by 900

       


      *   Devices Connected to the Graphics Accelerator   *


      Active Monitors: 1
      Non Active Digital Televisions: 1
      * Monitor *


      Monitor Name:   Generic PnP Monitor
      Display Type:   Analog
      Gamma Value:   2.2
      DDC2 Protocol:   Supported


      Maximum Image Size:
      Horizontal:   16.14 inches
      Vertical:   10.24 inches


      Monitor Supported Modes:
      640 by 480 (75 Hz)
      640 by 480 (60 Hz)
      640 by 480 (72 Hz)
      720 by 400 (70 Hz)
      800 by 600 (72 Hz)
      800 by 600 (75 Hz)
      800 by 600 (56 Hz)
      800 by 600 (60 Hz)
      1024 by 768 (75 Hz)
      1024 by 768 (70 Hz)
      1024 by 768 (60 Hz)
      1280 by 1024 (60 Hz)
      1280 by 1024 (75 Hz)
      1440 by 900 (60 Hz)
      1440 by 900 (60 Hz)

       

      Display Power Management Support:
      Standby Mode:   Supported
      Suspend Mode:   Supported
      Active Off Mode:  Supported


      Raw EDID:
      00 FF FF FF FF FF FF 00 21 63 D7 03 D2 23 02 00
      03 10 01 03 08 29 1A 78 EA D6 A5 A2 59 4A 95 24
      14 50 54 AF CF 00 81 80 95 00 95 00 01 01 01 01
      01 01 01 01 01 01 9A 29 A0 D0 51 84 22 30 50 98
      36 00 9A 00 11 00 00 1C 30 2A 00 98 51 00 2A 40
      30 70 13 00 9A 00 11 00 00 1E 00 00 00 FD 00 3C
      4B 1E 50 0E 00 0A 20 20 20 20 20 20 00 00 00 FC
      00 4C 43 44 20 4D 4F 4E 49 54 4F 52 0A 20 00 96


      * Digital Television *


      Monitor Name:   Generic PnP Monitor
      Display Type:   Digital
      Gamma Value:   2.2
      DDC2 Protocol:   Supported


      Maximum Image Size:
      Horizontal:   14.57 inches
      Vertical:   11.81 inches


      Monitor Supported Modes:
      640 by 480 (67 Hz)
      640 by 480 (75 Hz)
      640 by 480 (72 Hz)
      640 by 480 (60 Hz)
      720 by 400 (70 Hz)
      800 by 600 (72 Hz)
      800 by 600 (75 Hz)
      800 by 600 (56 Hz)
      800 by 600 (60 Hz)
      832 by 624 (75 Hz)
      1024 by 768 (75 Hz)
      1024 by 768 (70 Hz)
      1024 by 768 (60 Hz)
      1280 by 720 (60 Hz)
      1280 by 1024 (60 Hz)
      1280 by 1024 (75 Hz)

       

      Display Power Management Support:
      Standby Mode:   Not Supported
      Suspend Mode:   Not Supported
      Active Off Mode:  Not Supported