1. Press Ctrl-E during POST to launch the RAID BIOS configuration. Force the drives online by selecting Objects => Physical Drive => Force Online. For more details, see the Intel® RAID software user's guide
2. Use RAID BIOS configuration utility to create the RAID VD using exact same parameters as your old VD. Do NOT initialize the VD after creating it.
Thanks for your help.
Currently i am trying to rebuild a new hard disk for RAID 1 configuration. When i tried to rebuild it, the Intel Raid Utility show an error message "SBBM Table is full" and the status below the screen shows "Media error has been detect and added to SBBM table". Can you advise me on what i should do in order to rebuild my new hard disk
SBBM table = Soft Bad Block Management table. The error you saw is because of media error on the source drive during rebuild. I suggest you backup your data ASAP and replace the drive.