I have an odd situation, following a card install (firewire) on a windows 7 (32) machine I rebooted the machine and found the raid 10 array had failed, the raid array has 4 disks all of which are showing up as in good working order as far as SMART is concerned, one however had come up as "not connected". Being RAID 10 it should have come up as degraided not failed so I'm not sure where to go from here as the documentation says that I shouldn't be in the spot I'm in at all and as such doesn't show any path out. I have attached a screen shot of the RST status screen and the hard disk sentinal screen showing the SMART status of the disks.
Any help would be greatly appreciated.
I should note the Firewire card has been removed. Also in the bios I removed the "Not connected" drive from the array, however none of the other drives have been touched.
Windows 7 (32) Professional
Board: ASUSTek P7P55D LE