0 Replies Latest reply on Jun 27, 2011 12:54 PM by thurbeb

    DH57DD only 2 ram slots seem to work


      I have a DH57DD motherboard, but only 2 ram slots seem to be functioning.

      using a single DIMM, I tried every slot, and only the 2 furthest from the processor allow the system to boot.


      I currently have 2 DIMMs in the two working slots, but any configuration where the 2 slots near the processor are used, causes the

      board to not boot, and no beep codes.

      I have seen this information : http://www.intel.com/support/motherboards/desktop/sb/cs-011965.htm#single but it did not help


      Is there something I am missing here?

      A bios setting perhaps ?