0 Replies Latest reply: May 30, 2011 11:17 PM by Abula RSS

Memory and DH61DL

Abula Community Member
Currently Being Moderated

Hi,

 

I recently finished building a low powered PC, using

 

Intel® Desktop Board DH61DL

Intel® Core™ i3-2100T Processor

Kingston Technology HyperX LoVo 4GB 1333 (PC3 10666) KHX1333C9D3UK2/4GX

 

From the links above, the memory is rated 1.25V and inside intels specs of the mobo for the memory, System memory for DH61DL , Supports 1.2 V – 1.8 V DIMM memory voltage, but its mobo is runing the memory at 1.54V,

 

Idle y Load.png

 

I dont see a place in the bios to change the voltage, and im fine with that as long as the mobo could read the SPD from the modules and adjust the voltage on its own.

 

So im coming here for some ideas or what to do, since the board should be able to run at lower voltage than its currently running on the memory.

 

Thanks for any opinions, suggestions or info,


More Like This

  • Retrieving data ...