1 Reply Latest reply on Jun 2, 2011 10:22 AM by

    SOL Driver not loading during silent install XPSP2/3 Intel DQ67OW



      When doing silent installs (inf based) I'm seeing around 60% of machines failing for.....

            Class GUID:         {4D36E978-E325-11CE-BFC1-08002BE10318}
            Description:        Intel(R) Active Management Technology - SOL
            Device ID:          PCI\VEN_8086&DEV_1C3D&SUBSYS_200A8086&REV_04\3&11583659&0&B3
            Manufacturer:       Intel
            Name:               Intel(R) Active Management Technology - SOL (COM3)
            PNP Device ID:      PCI\VEN_8086&DEV_1C3D&SUBSYS_200A8086&REV_04\3&11583659&0&B3
            Service:            Serial
            Status:             Error
            Status Info:       
            Error Description: 
            User Config:        False
            Config Error Code:  10, THIS DEVICE CANNOT START


      Exactly the same hardware on all the machines, and they don't neccesarily fail everytime, but if I set them up cycling they'll normally fail and either lock up at shutdown (C:\Windows\System32\shutdown.exe -r) or come up with the error message on the next boot. Drivers are bundled into one folder for chipset/amt/heci/sol etc etc, but have also tried a seperate silent install using the setup.exe.

      Boards are the OEMBLK DQ67OW (Crowpoint) with bios 0050. Drivers are the latest versions from downloadcenter / platformsw.
      Any ideas as this doesn't happen on Win7/Vista installs, only XP Pro 32/64 SP2 or SP3. Some machines will cycle quite happily 15-20 times installing the OS then randomly fall over with this problem. I'm at a loss. MEI hasn't been provisioned. Bios is in its default state.