Need help trying to verify the health of raid 1 drives using the blue ports. The "Intel rapid storage technology" utility only shows drives connected to the other 6 sata ports (marvell generic 61xx controller). During boot, the option rom for the marvell 91xx controller does not indicate status as the messages flash by. All the docs I can find show examples and include troubleshooting from DX58SO and the 3Gb 61xx marvell controller. It seems to be working, but without any utility support I'm worried that I will not be able to recover a failed drive, change any config, or even know if everything is OK. I configured a similar system 6mo ago using DX58SO without issues. What am I missing here?