3 Replies Latest reply on Jun 9, 2011 2:56 PM by

    2 Xeon  X5650 with S5520SCR

    ordenata@ordenata.com

      i build the beklow system, based in S5520SCR:

       

      but ,, when i turn on the computer, chipsets become too hot ant goes very very slowly at point that is about 1hour to install windows

      i changed the mother board but happens the same

       

      Intel® Products

      Item

      Part Number

      MM #

      Quantity

      Description

      Intel®   Workstation Board S5520SCR

      S5520SCR

      900963

      1

      The S5520SCR features Next-Generation   Intel® Microarchitecture on a SSI EEB form factor board. Dedicated high speed   buses based on Intel® QuickPath Technology
      - Two dedicated high speed PCI Express* 2.0 x16 slots
      - Scalable memory expansion with 12 DIMMs slots
      - IEEE 1394a and 7.1 HD audio support
      - Powerful onboard IPMI 2.0 manageability with affordable KVM and remote   media redirection upgrade path

      Intel® Server Chassis SC5600BASE

      SC5600BASENA   (with North America power cord) and SC5600BASE

      900891 (with power cord) or 900403

      1

      The Intel® Server Chassis SC5600BASE   provides maximum reliability, scalability, and manageability in a highly   versatile Intel® pedestal or 5U server chassis

      includes:
      - One fixed 670W power supply
      - Three fixed chassis fans with ducting
      - One power supply fan
      - Supports up to six tool-free cabled drives, upgradable to six hot-swap   drives (SAS or SATA)

      Intel®   Xeon® Processor X5650 - 2.66GHz (12M Cache, 6.40 GT/s Intel® QPI)

      BX80614X5650

      907463

      2

      Requires   Heat Sink that supports 95W. Supports DDR3 up to 1333 MHz. Socket compatible   with platforms based on the Intel® 5500 series chipsets (LGA1366)

      Intel®   Thermal Solution STS100C (Combo) Supports processors up to 130W

      BXSTS100C

      900491

      2

      Passive/Active   Combination Heat Sink with Removable Fan. Supports processors up to 130W.
      Installation Instructions:
      Step 1: Hold the heatsink with other hand
      Step 2: Start first screw with only a couple turns
      Step 3: Start second screw (diagonal) with only a couple turns
      Step 4: Start third and forth screw with a couple turns.
      Step 5: Repeat 2 - 4 until reaching maximum 8 inch pounds of torque.
      Note: Do NOT over torque beyond 8 inch pounds

      ARIGRACK   Pedestal to rack conversion kit

      ARIGRACK

      908431

      1

      Kit   Includes: hinge cover; rack
      handles, intrusion switch jumper, new rail kit
      assembly, rack hardware kit, icon label,
      installation guide