1 Reply Latest reply on Oct 14, 2008 7:54 PM by fccccc1116

    The new method to improve the product of computers

    fccccc1116

       

      The new method to improve the product of computers

       

       

       

       

      • l Nowadays the mainstream CPU has been able to satisfy most of the requirements of programs and games. Consumers who have already have computers will not assemble new computers or promote CPU. If there wasn't revolutionary product appearance, the shipments would have gone down steady recent years. During the days on which mainstream computers has satisfied most of the software and many developed countries' per capita possession of computes approaches one hundred percent. How can we increase shipments?

      • l Compared with notebook, desktop computer is powerful and is able to be assembled of the latest accessories. As terminal entertainment, its unmovable can be neglected. So far, the main problems of desktop are heat, energy consumption, and dust inside, big volume, noise aroused by the board of CPU, and hardware problems caused by dust, heat and shock. If there is a new frame to solve these problems above, can consumer pay for the new frame?

       

      These are the advantages of my frame:

       

       

      1 Chassis is all closed, without dust, which solves most of the computer   problems coursed by dust. Except hardware broken, the chassis needn't opening.

       

       

      2 No fans, no noises, power saving and environment protection.

       

       

      3 Board will not change shapes for gravity, loose for shocks, or arouse bad touch. Machines are more durable.

       

       

      4 Succeeding characteristics of DIY from ATX chassis .Consumers can DIY freely.

       

       

      5 Super functions on delivering heat, which makes it suitable to use heater CPU. Temperature can be seen whenever it is, which is suitable for over clocking.

       

       

      6 Power supplier, hardware and CD-ROM which shocks are at the bottom of the chassis, decreasing shocks of the chassis efficiently and making the noise weaker.

       

       

      7 Memory, hardware...and all the parts on the motherboard can deliver heat efficiently.

       

       

      8 Shells can be designed with various lower-temperature systems to satisfy different consumer groups.

       

       

      9 Chassis are more beautiful and styles vary more.

       

       

      10 CPU and motherboard which needn't too much changing can be put into production and be on listing.

       

       

      11 Enlarged space of motherboard will contribute to future development.

       

       

      12 More advantages and concepts will be good for promotion.

       

       

      13 Provide a new standard. Acquire pays for use of patent from other board manufacturers.

       

       

      14 No fans on CPU, smaller packaging, lighter weight and lower freight.

       

       

      15 Board manufacturers only need make products well, not worry about cooling or style of fans.

       

       

      Among all the most famous PC newspapers and magazines, half of the computer failures are caused by dust and cooling. New frame fully defends those faults, making manufactures concentrate on the product of hardware itself, but not provide too much after-sales service.

       

       

      The new frame has so many advantages, that I believe it will be soon promoted to the global market under the support of your corporation. At that time, computer consumers all over the word will change their computers to new ones contain so many advantages given above.

       

       

         Motherboard vertical view

       

       

      This is the picture of the new motherboard designed by me. Though the picture is a little rough and the sizes have some faults, the main idea as been expressed. All the gold-finger slots are changed into pin sockets.

       

       

       

       

       

      Chassis left side view

       

       

       

       

       

      Chassis right side view

       

       

       

       

       

      It's to transport heat from the main parts of CPU and board to the large heat sink by the side.  Chassis is all closed, without dust. It introduced the advantage of the design detailed.

       

       

      Map on the back of chassis

       

       

       

       

       

      Equipment for cooling located at the side of the chassis, make it easy to demolition and to promote. We can design a wide range of cooling equipment for the user to choose, through the spring or magnet slot in the chassis side of the adsorption. If the design of the windmill made of metal, Christmas tree can cross over to place, design a swimming pool, golf course ... ... meet the needs of different consumer groups. The replacement of individual users of CPU cycles may be 4-6 years, and personalized cooling equipment replacement cycle will be fast, it is foreseeable that this is a piece of the lucrative market.

       

       

      This structure has many advantages, in line with the trend of the future development of the computer and personalization. I believe it will set off the launch of a new wave of computer buying.

       

       

       

       

       

       

       

       

       

       

       

      David Cui

      Mobile: +86 15889660765

      Email: fccccc1116@hotmail.com

       

       

        • 1. Re: The new method to improve the product of computers
          fccccc1116

          The new method to improve the product of computers

           

           

           

           

           

           

           

           

           

          • l Nowadays the mainstream CPU has been able to satisfy most of the requirements of programs and games. Consumers who have already have computers will not assemble new computers or promote CPU. If there wasn't revolutionary product appearance, the shipments would have gone down steady recent years. During the days on which mainstream computers has satisfied most of the software and many developed countries' per capita possession of computes approaches one hundred percent. How can we increase shipments?

          • l Compared with notebook, desktop computer is powerful and is able to be assembled of the latest accessories. As terminal entertainment, its unmovable can be neglected. So far, the main problems of desktop are heat, energy consumption, and dust inside, big volume, noise aroused by the board of CPU, and hardware problems caused by dust, heat and shock. If there is a new frame to solve these problems above, can consumer pay for the new frame?

           

          These are the advantages of my frame:

           

          1 Chassis is all closed, without dust, which solves most of the computer problems coursed by dust. Except hardware broken, the chassis needn't opening.

           

          2 No fans, no noises, power saving and environment protection.

           

           

          3 Board will not change shapes for gravity, loose for shocks, or arouse bad touch. Machines are more durable.

           

           

          4 Succeeding characteristics of DIY from ATX chassis .Consumers can DIY freely.

           

           

          5 Super functions on delivering heat, which makes it suitable to use heater CPU. Temperature can be seen whenever it is, which is suitable for over clocking.

           

           

          6 Power supplier, hardware and CD-ROM which shocks are at the bottom of the chassis, decreasing shocks of the chassis efficiently and making the noise weaker.

           

           

          7 Memory, hardware...and all the parts on the motherboard can deliver heat efficiently.

           

           

          8 Shells can be designed with various lower-temperature systems to satisfy different consumer groups.

           

           

          9 Chassis are more beautiful and styles vary more.

           

           

          10 CPU and motherboard which needn't too much changing can be put into production and be on listing.

           

           

          11 Enlarged space of motherboard will contribute to future development.

           

           

          12 More advantages and concepts will be good for promotion.

           

           

          13 Provide a new standard. Acquire pays for use of patent from other board manufacturers.

           

           

          14 No fans on CPU, smaller packaging, lighter weight and lower freight.

           

           

          15 Board manufacturers only need make products well, not worry about cooling or style of fans.

           

           

          Among all the most famous PC newspapers and magazines, half of the computer failures are caused by dust and cooling. New frame fully defends those faults, making manufactures concentrate on the product of hardware itself, but not provide too much after-sales service.

           

           

          The new frame has so many advantages, that I believe it will be soon promoted to the global market under the support of your corporation. At that time, computer consumers all over the word will change their computers to new ones contain so many advantages given above.

           

           

           

           

           

          This structure has many advantages, in line with the trend of the future development of the computer and personalization. I believe it will set off the launch of a new wave of computer buying.

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

          David Cui

          Mobile: 086 15889660765

          Email: fccccc1116@hotmail.com

           

           

           

           

           

           

           

           

           

           

           

           

           

           

           

          Details in the Annex,I want to contact with Mr. Rattner.

           

          Message was edited by: fccccc1116