0 Replies Latest reply on Jan 16, 2011 6:56 PM by SpiralPath

    Failed RAID 1 Drive


      I created a RAID 1 array with 2 identical Seagate Barracuda 21.5 TB drives and then one of the drives failed. This array is not the boot drive. I removed the failed drive and installed a replacement drive (same everything - manufacturer, model, size, etc.) using the same SATA port as the failed drive.


      Matrix Storage Console shows:






          |__RAID Hard Drives

               |-Port 2:ST31550541AS

               |-Missing Hard Drive

      Non-RAID Hard Drives

        |-Port 0: ST31500541AS


      I want to rebuild the array with the existing good drive and hopefully keep all of the data that is on the drive.


      I need help rebuilding the array.


      Thanks in advance