I want to upgrade my harddisk and found a nice 2.5" WD Scorpio Black WD5000BEKT 500 GB 7200rpm.
However it's a SATA 2 disk and the board is "only" SATA.
Since the pin configs are identical it should for all I know work, but i'm not sure.
Does anybody know if the D510 sata controller will accept a SATA2 disk?
Woops, just forget it, i checked WD' site:
and it says SATA 3GB/s meaning NOT SATA2 but just SATA .
The store I normally buy my hardware at must have made a typo .