The BIOS and drivers version are the latest disponible in the lenovo site.
Intel AMT 2.6: 220.127.116.114
Intel PRO/1000 LAN: 18.104.22.168
Intel Wireless LAN: 11.5.0.APIb
I had set the Manageability Feature to Intel AMT.
I used the Intel DTK softwares AMT Commander (Desktop) and AMT Outpost (T61 notebook) without problems in the wired interface. SOL (serial agents) and IDE-R functions ok.
Can I do anything else?
When you click on enable in the WEbUI does it allow for the change? Also you will need to setup your Wireless AP to handle the right settings.
•Supported network authentication types:
•Supported encryption types:
http://communities.intel.com/docs/DOC-1275 - check out this material on page 14 gives the same info.
try that & let me know if the enabled function works, also ensure that your radio is on on the T61, (make sure the switch is on in front of the keyboard).
No, it doesn't allow for the change.
I can´t create a new profile neither.
I had configured the wireless route as following:
O passphrase is Caio123$.
The wireless radio is on in T61. I access internet using it.
Another information is that the Wireless IP address in System Status menu is unknown.
The wireless and wired interface are in the same subnet. Is this a problem?
Wired interface: 192.168.1.230
Wireless interface: 192.168.1.231