5 Replies Latest reply on Sep 14, 2010 8:21 AM by mark_h_@intel

    ET Quad Port Server Adapter - Enable VMQ failed, cannot team

    ralp

      I can't seem to enable VMQ on the adapter ports. It's on a 2008 R2 Core installation.

      I've used nvspbind to remove all protocol bindings for the ET ports.

       

      When using the command "prosetcl adapter_setsetting 7 *VMQ Enabled" I get "Failed to set '*VMQ'"

      When using the command "prosetcl team_create 1,3,6,7 Team1 VMLB" I get "Failed to create the team"

       

      I've read through all info I could find without getting a solution - spend most of today on it actually.

      So any help would be much appreciated

       

      Edit:

       

      Here's a capture of using the commands:

       

      Z:\PROwinx64>nvspbind


      Hyper-V Network VSP Bind Application 6.1.7725.0.

      Copyright (c) Microsoft Corporation. All rights reserved.



      Adapters:


      {66F6D3FB-25C7-409B-B200-2DA5047E4684}

      "pci\ven_8086&dev_10e8&subsys_a02b8086"

      "Intel(R) Gigabit ET Quad Port Server Adapter #4"

      "Local Area Connection 7":

         disabled: ms_netbios       (NetBIOS Interface)

         disabled: ms_server        (File and Printer Sharing for Microsoft Networks)

         disabled: ms_pacer         (QoS Packet Scheduler)

         disabled: ms_msclient      (Client for Microsoft Networks)

         disabled: ms_lltdio        (Link-Layer Topology Discovery Mapper I/O Driver)

         disabled: ms_rspndr        (Link-Layer Topology Discovery Responder)

         disabled: ms_tcpip6        (Internet Protocol Version 6 (TCP/IPv6))

         disabled: ms_tcpip         (Internet Protocol Version 4 (TCP/IPv4))

         disabled: ms_netbt         (WINS Client(TCP/IP) Protocol)

         disabled: ms_smb           (Microsoft NetbiosSmb)

         disabled: iansprotocol     (Intel(R) Advanced Network Services Protocol)


      {0ABF6733-04EE-4293-973E-C8B4446FF7AB}

      "pci\ven_8086&dev_10e8&subsys_a02b8086"

      "Intel(R) Gigabit ET Quad Port Server Adapter #3"

      "Local Area Connection 6":

         disabled: ms_netbios       (NetBIOS Interface)

         disabled: ms_server        (File and Printer Sharing for Microsoft Networks)

         disabled: ms_pacer         (QoS Packet Scheduler)

         disabled: ms_msclient      (Client for Microsoft Networks)

         disabled: ms_lltdio        (Link-Layer Topology Discovery Mapper I/O Driver)

         disabled: ms_rspndr        (Link-Layer Topology Discovery Responder)

         disabled: ms_tcpip6        (Internet Protocol Version 6 (TCP/IPv6))

         disabled: ms_tcpip         (Internet Protocol Version 4 (TCP/IPv4))

         disabled: ms_netbt         (WINS Client(TCP/IP) Protocol)

         disabled: ms_smb           (Microsoft NetbiosSmb)

         disabled: iansprotocol     (Intel(R) Advanced Network Services Protocol)


      {E1C8F9EB-45C6-4023-ADE4-EC4B24CFB527}

      "pci\ven_8086&dev_10e8&subsys_a02b8086"

      "Intel(R) Gigabit ET Quad Port Server Adapter #2"

      "Local Area Connection 5":

         disabled: ms_netbios       (NetBIOS Interface)

         disabled: ms_server        (File and Printer Sharing for Microsoft Networks)

         disabled: ms_pacer         (QoS Packet Scheduler)

         disabled: ms_msclient      (Client for Microsoft Networks)

         disabled: ms_lltdio        (Link-Layer Topology Discovery Mapper I/O Driver)

         disabled: ms_rspndr        (Link-Layer Topology Discovery Responder)

         disabled: ms_tcpip6        (Internet Protocol Version 6 (TCP/IPv6))

         disabled: ms_tcpip         (Internet Protocol Version 4 (TCP/IPv4))

         disabled: ms_netbt         (WINS Client(TCP/IP) Protocol)

         disabled: ms_smb           (Microsoft NetbiosSmb)

         disabled: iansprotocol     (Intel(R) Advanced Network Services Protocol)


      {EC58D1C0-1F7F-4070-8297-1C6136260988}

      "pci\ven_8086&dev_10e8&subsys_a02b8086"

      "Intel(R) Gigabit ET Quad Port Server Adapter"

      "Local Area Connection 4":

         disabled: ms_netbios       (NetBIOS Interface)

         disabled: ms_server        (File and Printer Sharing for Microsoft Networks)

         disabled: ms_pacer         (QoS Packet Scheduler)

         disabled: ms_msclient      (Client for Microsoft Networks)

         disabled: ms_lltdio        (Link-Layer Topology Discovery Mapper I/O Driver)

         disabled: ms_rspndr        (Link-Layer Topology Discovery Responder)

         disabled: ms_tcpip6        (Internet Protocol Version 6 (TCP/IPv6))

         disabled: ms_tcpip         (Internet Protocol Version 4 (TCP/IPv4))

         disabled: ms_netbt         (WINS Client(TCP/IP) Protocol)

         disabled: ms_smb           (Microsoft NetbiosSmb)

         disabled: iansprotocol     (Intel(R) Advanced Network Services Protocol)


      {70694AF8-694A-4019-9BD8-326CA1D9AF0C}

      "b06bdrv\l2nd&pci_163914e4"

      "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #2"

      "Local Area Connection 3":

         disabled: ms_netbios       (NetBIOS Interface)

         enabled:  ms_netbios       (NetBIOS Interface)

         disabled: ms_server        (File and Printer Sharing for Microsoft Networks)

         enabled:  ms_server        (File and Printer Sharing for Microsoft Networks)

         enabled:  ms_pacer         (QoS Packet Scheduler)

         disabled: ms_msclient      (Client for Microsoft Networks)

         enabled:  ms_msclient      (Client for Microsoft Networks)

         enabled:  ms_lltdio        (Link-Layer Topology Discovery Mapper I/O Driver)

         enabled:  ms_rspndr        (Link-Layer Topology Discovery Responder)

         enabled:  ms_tcpip6        (Internet Protocol Version 6 (TCP/IPv6))

         enabled:  ms_tcpip         (Internet Protocol Version 4 (TCP/IPv4))

         disabled: ms_netbt         (WINS Client(TCP/IP) Protocol)

         enabled:  ms_netbt         (WINS Client(TCP/IP) Protocol)

         disabled: ms_smb           (Microsoft NetbiosSmb)

         enabled:  ms_smb           (Microsoft NetbiosSmb)

         disabled: iansprotocol     (Intel(R) Advanced Network Services Protocol)


      {2E2C1BE0-1E9B-45C4-BC91-FFE2DDD9298E}

      "b06bdrv\l2nd&pci_163914e4"

      "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client)"

      "Local Area Connection 2":

         disabled: ms_netbios       (NetBIOS Interface)

         enabled:  ms_netbios       (NetBIOS Interface)

         disabled: ms_server        (File and Printer Sharing for Microsoft Networks)

         enabled:  ms_server        (File and Printer Sharing for Microsoft Networks)

         enabled:  ms_pacer         (QoS Packet Scheduler)

         disabled: ms_msclient      (Client for Microsoft Networks)

         enabled:  ms_msclient      (Client for Microsoft Networks)

         enabled:  ms_lltdio        (Link-Layer Topology Discovery Mapper I/O Driver)

         enabled:  ms_rspndr        (Link-Layer Topology Discovery Responder)

         enabled:  ms_tcpip6        (Internet Protocol Version 6 (TCP/IPv6))

         enabled:  ms_tcpip         (Internet Protocol Version 4 (TCP/IPv4))

         disabled: ms_netbt         (WINS Client(TCP/IP) Protocol)

         enabled:  ms_netbt         (WINS Client(TCP/IP) Protocol)

         disabled: ms_smb           (Microsoft NetbiosSmb)

         enabled:  ms_smb           (Microsoft NetbiosSmb)

         disabled: iansprotocol     (Intel(R) Advanced Network Services Protocol)


      {9023332C-4CA5-490F-BF0A-3CBFEDF40617}

      "usb\vid_04b3&pid_4010"

      "IBM USB Remote NDIS Network Device"

      "Local Area Connection":

         disabled: ms_netbios       (NetBIOS Interface)

         disabled: ms_server        (File and Printer Sharing for Microsoft Networks)

         disabled: ms_pacer         (QoS Packet Scheduler)

         disabled: ms_msclient      (Client for Microsoft Networks)

         disabled: ms_lltdio        (Link-Layer Topology Discovery Mapper I/O Driver)

         disabled: ms_rspndr        (Link-Layer Topology Discovery Responder)

         disabled: ms_tcpip6        (Internet Protocol Version 6 (TCP/IPv6))

         disabled: ms_tcpip         (Internet Protocol Version 4 (TCP/IPv4))

         disabled: ms_netbt         (WINS Client(TCP/IP) Protocol)

         disabled: ms_smb           (Microsoft NetbiosSmb)

         disabled: iansprotocol     (Intel(R) Advanced Network Services Protocol)


      cleaning up...finished (0)


      Z:\PROwinx64>

       

      And another:

       

      C:\Program Files\Intel\DMIX\CL>prosetcl adapter_enumerate


          Number of adapters currently present: 7


              1) Intel(R) Gigabit ET Quad Port Server Adapter #3

              2) Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client)

              3) Intel(R) Gigabit ET Quad Port Server Adapter #4

              4) Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #2

              5) IBM USB Remote NDIS Network Device

              6) Intel(R) Gigabit ET Quad Port Server Adapter #2

              7) Intel(R) Gigabit ET Quad Port Server Adapter



      C:\Program Files\Intel\DMIX\CL>prosetcl adapter_enumeratesettings 1


      1) Intel(R) Gigabit ET Quad Port Server Adapter #3


          Settings:


              NetworkAddress           -

              NameServer               - 0.0.0.0

              ConnectionName           - Local Area Connection 6

              LLIPorts                 -

              DefaultGateway           - 0.0.0.0

              IPAddress                - 0.0.0.0

              SubnetMask               - 0.0.0.0

              EnableDca                - Enabled

              EnableLLI                - Disabled

              *FlowControl             - Rx & Tx Enabled

              *HeaderDataSplit         - Enabled

              *InterruptModeration     - Enabled

              *IPChecksumOffloadIPv4   - Rx & Tx Enabled

              *IPsecOffloadV2          - Disabled

              *JumboPacket             - Disabled

              *LsoV2IPv4               - Enabled

              *LsoV2IPv6               - Enabled

              *MaxRssProcessors        - 2

              *NumaNodeId              - System Default

              *PriorityVLANTag         - Priority & VLAN Enabled

              *RSS                     - Enabled

              *SpeedDuplex             - Auto Negotiation

              *TCPChecksumOffloadIPv4  - Rx & Tx Enabled

              *TCPChecksumOffloadIPv6  - Rx & Tx Enabled

              *UDPChecksumOffloadIPv4  - Rx & Tx Enabled

              *UDPChecksumOffloadIPv6  - Rx & Tx Enabled

              *VMQ                     - Disabled

              *WakeOnMagicPacket       - Enabled

              *WakeOnPattern           - Enabled

              EnablePME                - Disabled

              ITR                      - Adaptive

              LogLinkStateEvent        - Enabled

              MasterSlave              - Auto Detect

              NumRssQueues             - 1 Queue

              WaitAutoNegComplete      - Auto Detect

              WakeOnLink               - Disabled

              EnableDHCP               - Disabled

              *ReceiveBuffers          - 256

              *RssBaseProcNumber       - 0

              *TransmitBuffers         - 512


      C:\Program Files\Intel\DMIX\CL>prosetcl adapter_setsetting 1 *VMQ Enabled


      1) Intel(R) Gigabit ET Quad Port Server Adapter #3


              Failed to set '*VMQ'



      C:\Program Files\Intel\DMIX\CL>