1 of 1 people found this helpful
Which board is it?
Have you tried to disable the infra red from the bios? If it is available of course.
Let me know the vendor and device id from the device manager.
All the best,
This does not seem to be an Intel component. You forgot to mention which board are you using?
For Intel (R) Desktop board, the IR driver is called Winbond. It can be downloaded from the download page for the board dp45sg. The IR driver works only on Vista/7.
For your information:
One more thing, there is another thing which is called Intel (R) Quick Resume Technology which is present on some intel desktop board. If you have such a board, you may need to disable this from the bios. It works only on Windows Media Center.
Intel® Quick Resume Technology
Intel Quick Resume Technology is a requirement for Media Series boards supporting Intel® Viiv™ Technology.
To disable Intel Quick Resume Technology:
- Enter BIOS Setup by pressing [F2] during boot.
- Go to the Power menu.
- Set Intel Quick Resume Technology to Disabled.
- Exit and save changes [F10].
Keep us posted. Post a screenshot of the device manager with the hardware ids if you ever need any further assistance..
All the best,
It's a Toshiba board, not recent, version AO.
Here are the screen shots as much as I don't like to publicize my errors.
Now that the problem is fixed there are no yellow alerts, which was what I had where it now shows infra red
I went to the properties tabs which only gave me a location problem - the Intel 82801 chip.
Instead, I should have gone to the Details tab which gives the manufacturer and device details. A quick Google search showed me that the problem device was IR, and that in turn lead me to Toshiba's drivers.
I only hope my mistake helps someone else.