Typing mistake! The display issues I found are with the motherboard and not the minitor.
Thanks in advance for any suggestions.
Try CMOS Clearance (Remove and keep aside CMOS battery for like an hour)
Next, recover the BIOS, following are the steps.
Download file named "RQ0015P.BIO" from http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19116&ProdId=3058&lang=eng
Format the pen drive and copy this file in the pen drive.. Power off your system
Open your cabinet, remove the BIOS jumper completely (Which would be in 1-2 position)
Insert the pen drive into back side USB port
Power on your system. It should shut down or restart or ask you to shut down in 10-15 minutes
Place back jumper on 1-2 position (Make sure you have not placed it back wrong, like on 2-3)
Remove the pen drive
Power on system
See if you get display
Solved! I got the display when I replaced the RAM.
Hello intel star!
my pc configuration is
intel dg43nb 2gb ram qaud core 2.66 nvidea 250gts 1024mb graphic card.
today i have cleaned my cabinate. but now there is no display or beep.
I follow ur steps. is there some display while updating the BIOS. plz reply me. plz
As you are getting this problem after cleaning the cabinet, I suggest to check if the graphics card is placed properly in its slot.
MOTHER BOARD INTEL P4 DG41RQ (OEM) serial number: R 6346GEZ810599D
SUPREME-THE IT MALL
35 Chittaranjan Avenue , Kolkata-12
RETAIL INVOICE NO: SUP/MALL/ 30060/10-11
I found ; THIS MOTHER BOARD IS NOT WORKING PROPERLY
I requeted to replace or repair this MOTHER BOARD
MOTHER BOARD was send for checking on 24/02/2011
After repairing i got it on 23/3/11
but same PROBLEM again started.
From Repairing office -Notes are" NO DEFECT FOUND IN THIS PART IN OUR FUNCTIONAL TESTING AT WALK IN CENTRE."
REDINGTON INDIA LIMITED-KOLKATA
P-89, CIT ROAD
TIN NO: 19200838049 CST NO : 19200838243/26.06.1995
Please advice me WHAT TO DO NEXT?