9 Replies Latest reply on Aug 9, 2010 5:33 AM by pshanesmith

    DX58S0 Booting Issues

    pshanesmith

      I have a DX58S0 motherboard and it will only boot with a fan connected to the IOH fan pins.  This means that any fan I plug into it will run at full speed.  I tried using a speed limiter (resistor) and it won't work with that either.  From what I understood, the IOH fan was supposed to be optional.

       

      So, as it's currently configured, there is a fan plugged into the rear and the IOH.  If I unplug the IOH and plug it into the front fan pins, it will not boot.  The power light just comes on and it doesn't do anything.

       

      I have updated to the latest BIOS and have reset the settings to optimal.  Any ideas on this one?