Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4761 Discussions

ASR26XXFH3XR - 3 PCI-X Full size ?

idata
Employee
1,607 Views

Hello,

I know that is possible install on SR2600URLX a 3 x full-height PCI-X 133 MHz riser card.

I don't find any specification about this riser card and I need to be sure that on this server with this riser card is possible installing number 3 card PCI-X FULL SIZE.

Is it possible?

Where I can find more details about this riser card on web site? It seems impossible.

Thank you very much!

bye

0 Kudos
5 Replies
Edward_Z_Intel
Employee
335 Views
0 Kudos
idata
Employee
335 Views

Hi Edward,

thank you for your answer but I have already red the document and it wasn't very useful:

On section 9 page 78, I could read (Table 58. Riser Card Options):

-----------------

2U PCI-X Active Riser

 

(Product Order Code – ASR26XX____)

One Full Height PCI-X 133Mhz connector

 

Two Full Height PCI-X 100Mhz connectors

-----------------

The "Full Height" definition means that we could put a board that isn't Low profile but doesn't give me any information about the length size (if half/mid length or full length that is a full size board). Moreover on the chapter 9.2: "PCI Riser Card Mechanical Drawings" the 2U PCI-X Active Riser isn't reported..

What I'm expecting is a definition like this:

full-height, mid-length PCI-X 133 MHz

or

full-height, full-length PCI-X 133 MHz

That were definitions of PCI slot of the old server series (i.e. SR2500 / SR1530)

I hope that now is more clear what I need...

Thank you

Daisy

0 Kudos
Daniel_O_Intel
Employee
335 Views

How long is the riser card you plan to install?

0 Kudos
idata
Employee
335 Views

Hi Dan,

the board is a Dialogic Diva PRI E1-30 PCI with these dimensions:

— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 312.00 mm x 111.15 mm (PCB)

— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 325.31 mm x 126.31 mm (with bracket)

— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 352.17 mm x 126.31 mm (with bracket and retainer)

http://www.dialogic.com/products/tdm_boards/media_processing/docs/11233-diva-pri-ds.pdf http://www.dialogic.com/products/tdm_boards/media_processing/docs/11233-diva-pri-ds.pdf

Of course we could remove the retainer.

— V-, UM-, PRI/E1-30 / T1-24 PCI/PCIe: 352.17 mm x 126.31 mm (with bracket and retainer)

http://www.dialogic.com/products/tdm_boards/media_processing/docs/11233-diva-pri-ds.pdf http://www.dialogic.com/products/tdm_boards/media_processing/docs/11233-diva-pri-ds.pdf

Of course we could remove the retainer.

Thank you

0 Kudos
Daniel_O_Intel
Employee
335 Views

That's going to be a tight fit. It's 31cm from the front to the back of the riser card insert, by my unofficial lab measurement. Also, any portrusions on the card might hit the chipset heatsink, if the card is put on the bottom-most slot.

0 Kudos
Reply