3 Replies Latest reply on Dec 16, 2010 11:11 PM by

    Intel Extreme Graphics Driver 6.14.10.4342 Problem

    dust

      Hi,

       

      I have installed Intel Extreme Graphics Driver 6.14.10.4342. But more frequently this driver fails to start and the screen resolution is set to 640x480. I'm not able to move this slider. Earlier version was 6.14.10.3762. Below is the Intel Graphics report:

       

      INTEL(R) EXTREME GRAPHICS REPORT

        

      Report Date: 04/24/2010

      Report Time[hr:mm:ss]: 13:00:59

      Driver Version: 6.14.10.4342

      Operating System: Windows NT* 5.1.2600 Service Pack 2

      Default Language: English

      DirectX* Version: 9.0

      Physical Memory: 253 MB

      Min. Graphics Memory: 1 MB

      Max. Graphics Memory: 64 MB

      Graphics Memory in use: 4 MB

      Processor: x86

      Processor Speed: 2400 MHZ

      Vendor ID: 0x8086

      Device ID: 0x2562

      Device Revision: 1

        

      * Output Devices Connected to Graphics Accelerator *

      Active Monitors:1

       

      The temporary solution I'm following is to upgrade from *.3762 to *.4342. This runs for few days and the same problem occurs. Then selecting 'Role back driver' (to *.3762) will solve the problem, but for few days. I'm repeatedly upgrading and rolling back to escape from this problem.

       

      The error that device property window showing is "This device cannot start. Error code 10".

       

      Message was edited by: dust