2 Replies Latest reply on Aug 8, 2018 5:39 PM by Intel Corporation

    i3 4170 Напряжение 1.75

    Zloba

      Материнская плата msi h81m-p33 , кулер стоковый . В биосе нет настройки по смене напряжения ,оно заблокировано на 1.75 . Биос перепрошивал, ничего не менялось , в итоге все греется почти до 80 градусов под нагрузкой. Что с этим делать?

        • 1. Re: i3 4170 Напряжение 1.75
          Intel Corporation
          This message was posted on behalf of Intel Corporation

          Hello Zloba
           
          Thank you for joining the community.
           
          I see that you are having concerns with the Intel® processor’s frequency, allow me to help you investigate the case.  
           
          I would like to gather more information about the configuration you have on the computer.  Please attach to this thread the TXT file the Intel® System Support Utility will generate: https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility
          Steps to save the report:

          1. Run the utility.
          2. Click on “Scan” to get the scanned system.
          3. Once the scan is complete click on “next”.
          4. Use the “save” option, save the report to your desktop.
          5. To attach a file, you must click the “Attach” option on the bottom right-hand corner of the response box.
           
          Is your BIOS up to date? If not please update your system BIOS (https://www.msi.com/Motherboard/support/H81M-P33#down-bios)
           
          Could you go into the system BIOS and look for the feature of speed-step or Intel® adaptive thermal monitor and disable the feature to test the system.
           
          Hope this help.  
           
          Regards,
          Leonardo C.
          • 2. Re: i3 4170 Напряжение 1.75
            Intel Corporation
            This message was posted on behalf of Intel Corporation

            Hello Zloba

            I was checking your case and would like to know if you need further help.  If so, please do not hesitate in replying back.
             
            Regards,
            Leonardo C.