I am facing the same situation. Laptop came with Windows 10 Pro and the create button was there out of the box, but we need Enterprise Edition. After upgrading to Windows 10 Enterprise, I installed IRST and there is no create button. The drives are still set to RAID 0 but there is no way to manage it.
Ideally, I would like to have this work from an image that my company uses. When imaging the laptop, it re-partitions the drives and therefore no RAID 0.
Thanks in advance for any help!
This message was posted on behalf of Intel Corporation
Hello Mike_Dinsdale and gary.l.bartram
Thank you for joining the community.
Mike_Dinsdale in order to help you better, I would like to gather more information about the configuration you have on the computer. Please attach to this thread the TXT file the Intel® System Support Utility will generate: https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility
Steps to save the report:
- Run the utility.
- Click on “Scan” to get the scanned system.
- Once the scan is complete click on “next”.
- Use the “save” option, save the report to your desktop.
- To attach a file, you must click the “Attach” option on the bottom right-hand corner of the response box.
Provide me with the Intel® RST report; following these steps:
- Open the Intel Rapid Storage Technology user interface (Start > Programs > Intel > Intel® Rapid Storage Technology).
- Click the Help icon.
- Click the System Report icon.
- Click Save.
- Please attach the report to the thread.
Could you also provide me with a picture of the disk management? (Right-click on the Windows® logo> disk management)
gary.l.bartram I have sent you a private a private message; please review your private inbox.
Sorry I've been away for a couple of days.
These are how my disks appear in Disk Management.
On my other 2 systems they show as 1 simple volume of about 5.5 TB, and the Intel RST program splits it into D drive of 2.2TB and E drive with the remainder.
Undoubtably this is something simple, my main concern is why it crashed in the first place, but that's for another day. Let's get it working again.
OK, it's fixed.
I had to change a setting in the BIOS of the machine (it has an ASRock mobo). The setting "SATA Mode Selection" had to be switched to RAID.
When this was saved and rebooted, it gave me access to the Intel Rapid Store config utility at boot time (Ctrl+I) to enter, rather than via the Windows interface.
Created Volume0 using all 6 drives at 3.2TB, and then the second, Volume1, with the remaining space, approx 2.4TB. Created in RAID0 mode with 128kb strip size.
Then under Windows disk management, configured for GPT and formatted as normal.
Now in RST Windows I can see them correctly created.
So not created via the Windows program, more at the root level, but it's worked!