7 Replies Latest reply on Apr 23, 2018 12:23 AM by Intel Corporation

    power 5V for SSD in 1208WTTGSR

    traian

      Hi . Where I can get power 5V  for SSD disk attached to sata port 4 on platform in 1208WTTGSR ?

      Port 4 sata   & port5  sata   are inside platform  (on image )

       

        • 1. Re: power 5V for SSD in 1208WTTGSR
          Intel Corporation
          This message was posted on behalf of Intel Corporation

          Hello Traian,

          Could you please let us know what kind of drive configuration you are going to use?

          Best regards, 
          Carlos_Intel


           

          • 2. Re: power 5V for SSD in 1208WTTGSR
            traian

            I want to configure raid 10  of 5 disks : 4 + 1 Hot Spare

            4 SSD I can paste in front panel (basket) / They are connect to Sata 0-3  + 1 disk I want to connect to port sata 4 . But I don't know - where can take power for 5-th disk

             

            All disks : Intel SSD3610 400 GB

            • 3. Re: power 5V for SSD in 1208WTTGSR
              Intel Corporation
              This message was posted on behalf of Intel Corporation

              Hello Traian,

              The Intel® Server System R1208WTTGSR has the option to add till 8 drives in the front panel.
              This is a 1U chassis this uses only the front panel to set disks and that board has those two extra SATA port because the board model is also used to be set in another kind of chassis.
              Did you set the 5 drives in the front?

              Best Regards

              Carlos_Intel
               

              • 4. Re: power 5V for SSD in 1208WTTGSR
                traian

                I can't configure raid of 5 disks  , because in front panel : 1-4 basket - sata 0-3 , 5-8 basket - sSATA .

                5-th drive its part of ssata .

                • 5. Re: power 5V for SSD in 1208WTTGSR
                  Intel Corporation
                  This message was posted on behalf of Intel Corporation

                  Hello traian,

                   

                  We just realized that you are apparently using the embedded RAID solution.


                  There is no way to connect the optional white SATA ports as the chassis does not have available power connectors.


                  In order to be able to create a RAID 10 with that amount of drives, you will need to have a RAID Controller.


                  These are some options that may fit your setup: 

                                                                                                 

                  AdaptecRAID88058805 (PCIe 3.0 x8, 12Gb/s, 1GB cache, SAS-Enterprise, 8 internal ports, RAID Controller)Active
                  LSIRAIDLSI004179361-8i (PCIe 3.0 x8, 12Gb/s, 1GB cache, SAS-Enterprise, 8 internal ports, RAID Controller)Active
                  IntelRAIDRS3DC080RS3DC080 (PCIe 3.0 x8, 12Gb/s, 1GB cache, SAS-Enterprise, 8 internal ports, RAID Controller)Active


                  Please let me know if this information fits your needs.

                  Best regards.


                  Carlos_Intel

                  • 6. Re: power 5V for SSD in 1208WTTGSR
                    Intel Corporation
                    This message was posted on behalf of Intel Corporation

                    Hello traian,

                     

                    Hope you are doing fine.


                    We are wondering if you have further questions or if we are able to close this thread.
                    Thank you.

                     

                    Best regards.
                    Carlos_Intel

                    • 7. Re: power 5V for SSD in 1208WTTGSR
                      Intel Corporation
                      This message was posted on behalf of Intel Corporation

                      Hello traian,

                      We would like to know if any of the previously mentioned options feed your needs.

                      Best Regards

                      Charlie_Intel