Thank you for your interest in the Intel Aero drone.
What if you connect to the drone's wifi access point? Do you get the same error?
Also, try rebooting after connecting to the Aero access point.
Let me know if it works.
I tested this issue while the drone was connected to a wifi network and I got the same error as you.
After connecting to the drone's acces point and rebooting, it worked.
This is why I suggested this. Let me know if this fixes your issue so I can investigate further in case it doesn't.
I have the same problem. Exactly the same error messages as MarioTavarez has.
Kernel:Linux intel-aero 4.4.76-aero-1.2 #1 SMP PREEMPT Thu Nov 9 21:20:17 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Connecting to the drone's wifi network didn't solve the issue.
I also tried to use the Realsense D435 on the drone. Here https://github.com/intel-aero/meta-intel-aero/wiki/90-(References)-OS-user-Installation you say that the R200 and the D435 need different kernel drivers. May it be possible that after installing the drivers for D435, the R200 is not working anymore?
You should try reinstalling the camera drivers and make sure you are using USB 3.0.
The branch choice depends on the camera you are using.
If you are using the Aero camera, you should use the R200 branch, but if you are using a third party camera, you should use the main branch of the SDK.
Do you know how I can access the camera below? How can I take a picture from that camera? is that it only appears from video 0 - video13
but how do I access the camera below. With Opencv I need to access that camera since the camera needs to detect an object that is below it.
I have the vision accesory kit
I want to access the third camera that is to the camera that you see down, I want to take photography and video from that camera called bottom, do you know how? for what I see does not come as access to that camera directly
for what I see does not come as access to that camera directly