3 Replies Latest reply on Mar 28, 2018 9:41 PM by Intel Corporation

    S1400FP4 How update bios support  E5-2400 V2 CPU

    myloveqiang

      S1400FP4 How update bios support  E5-2400 V2 CPU@

       

       

       

      System     windows 10 or windows server 2012

        • 1. Re: S1400FP4 How update bios support  E5-2400 V2 CPU
          Intel Corporation
          This message was posted on behalf of Intel Corporation

          Hello myloveqiang,
           
                      “How to upgrade the BIOS on a S1400FP4”.
          You can download the latest BIOS from:
          https://downloadcenter.intel.com/download/26964/Intel-Server-Board-S1400FP-Firmware-Update-Package-for-EFI?product=66137
           
          Also, read the “Read Me.txt” file.
           
          But also here are the steps:
          - Unzip the contents of the update package and copy all files to a folder on a USB flash drive
          - Insert the USB flash drive to any available USB port on the server system to be updated
          - Boot the Server to the EFI shell.  This can be accessed via the <F2> BIOS setup utility during POST.
          - Run the command "map -r" in the EFI shell to mount the USB flash drive
          - Run the command "fs0:" to change folders to the USB flash drive. The USB flash drive
          may also mount to fs1: depending on  other installed devices. The number of "fs#" is
          dependent on the result of command "map -r"
          - Change folders to the folder storing the update package files
          - Run the command "Startup.nsh" to start updating all the firmware and BIOS updates
           
          Warning:
          !!Do NOT reboot or remove power from your system during the update process.
          Doing so may render your system inoperable. !!
           
          -----  Verifying updates
          -  Reboot the system
          -  During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
          -  Hit the F9 key to load BIOS Defaults
          -  At the MAIN menu verify the BIOS revision is correct
          -  Move cursor to the SERVER MANAGEMENT Menu
          -  Move cursor down to the SYSTEM INFORMATION Option and hit Enter
          -  Verify the BMC Firmware revision is correct
          -  Verify the SDR revision is correct
          -  Verify the ME Firmware revision is correct
          -  Hit the F10 Key to save changes and Exit
           
          If there is anything else we can help please feel free to ask.
           
          Best regards,
                     
          Henry A.

          • 3. Re: S1400FP4 How update bios support  E5-2400 V2 CPU
            Intel Corporation
            This message was posted on behalf of Intel Corporation

            Hello myloveqiang,

                I am glad the information provided helped.  If there isn’t anything I can help I will proceed on closing the forum.

            Best regards,
                 
            Henry A.