-
1. Re: The compass is fail to connect after drone fell down.
This message was posted on behalf of Intel CorporationHello Cc x,
Thank you for your interest in the Intel Aero drone.
Have you tried calibrating the drone by following this guide?
https://github.com/intel-aero/meta-intel-aero/wiki/02-Initial-setup#calibration
Please share the error message you're getting or a screenshot if possible.
Also, make sure your PX4 firmware is updated to the latest version.To update the flight controller use the following command:cd /etc/aerofc/px4/ aerofc-update.sh nuttx-aerofc-v1-default.px4
You can also flash a new version of the firmware directly from the PX4 repository. Follow the instructions on their wiki for that.
If the issue still persists after this, you can try reflashing the image on the aero drone.
Hope this helps.
Regards,
Octavian -
2. Re: The compass is fail to connect after drone fell down.
Hi Octavian:
Thanks for your information!
We'd tried to reflash OS and update the firmware of PX4 before.
Unfortunately,it still not work.
What we doing is try to replace the broken component(hardware) and see how's happen after that.
I'll keep post the result that we done.
thanks!
C.C.
-
3. Re: The compass is fail to connect after drone fell down.
This message was posted on behalf of Intel CorporationHello C.C.
Thank you for your reply. I will be waiting for your update.
In the meanwhile you can find spare parts for Aero here: https://click.intel.com/intel-aero-drone-spare-parts.html
Regards,
Octavian