1 Reply Latest reply on Apr 1, 2010 12:47 AM by RJL190365

    DQ57TM - Enable XMP profile

    whizamit

      Is there a way to enable XMP profile on DQ57TM? The only BIOS options for Memory are for voltage.

        • 1. Re: DQ57TM - Enable XMP profile
          RJL190365

          Sorry, but the DQ57TM uses only JEDEC SPD settings. As a result, you cannot take full advantage of 1600-speed or faster memory - nor can you take any advantage of "overclocked" tighter CAS latency timings than what is programmed into the SPD for auto-setting. As a result, for example, a Corsair CMX4GX3M2A1600C7 dual-channel memory kit will only run at DDR3-1333 speed with 9-9-9-24 timings on that particular Desktop Board. (This assumes that you're using an i3-530 or higher processor. There is a Pentium G6950 and a Celeron G1101 processor which are compatible with this motherboard - but they both support only up to DDR3-1066 memory, which will result in their memory speeds defaulting to DDR3-1066 and their timings to 8-8-8-22 using the aforementioned Corsair memory kit.)