Thank you for your interest in our Intel products.
Can you please elaborate on the steps you were doing trying to connect to your board? Are you trying to configure Edison as a webserver? What is the error message you're getting?
I'm sorry that the information was not enough.
I just try to set up Wifi of the edison.
I used PuTTY and finished all operations on PuTTY.
Then I tried to connect it as check.
Have you followed the steps in this guide? https://software.intel.com/en-us/connecting-your-intel-edison-board-using-wifi
Let me know if the guide helps fix your issue or we can investigate the issue further.
Yes, I did.
The edison board is connected wifi, but it refuses.
Thank you for your patience.
The reason it's refusing connection could be that port 80 is occupied. The avoid this issue use any other port instead of 80. Update line in code in the sketch
After running the sketch, url address also could be updated with the port number for web browser. For example if your IP address is
220.127.116.11- add the
:81at the end:
Or you can follow the steps in this thread. It seems they had the same issue as you and were able to fix it: https://communities.intel.com/message/275569#275569
Hope this helps.