1 Reply Latest reply on Jan 13, 2018 7:33 AM by Stefan3D

    Pc wont display anything with new Motherboard


      Hi i recently bought a new motherboard (asus H81M-plus) and it wont display anything using my i7-4790k cpu which is on the supported list of the motherboard and the bios is up to date . I used an older cpu cpu though and worked fine . So any ideas ?


        • 1. Re: Pc wont display anything with new Motherboard

          Clear CMOS after changing a processor.


          Check all iGPU configurations in BIOS as described at H81M-PLUS Manual | Mainboards | ASUS Deutschland


          Max. CPU Graphics Ratio

          GPU Boost

          CPU Graphics Voltage


          Graphics Configuration

          Allows you to select a primary display from iGPU, and PCIe graphical devices.

          Primary Display [Auto]

          Allows you to select which of the iGPU/PCIE Graphics device should be the Primary

          Display. Configuration options: [Auto] [iGPU] [PCIE]

          iGPU Memory [Auto]

          Allows you to select the amount of system memory allocated to DVMT 5.0 used by the

          iGPU. Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M]

          [256M] [288M][320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]

          Render Standby [Auto]

          Allows you to enable or disable Intel® Graphics Render Standby support to reduce

          iGPU power use when the system is idle. Configuration options: [Auto] [Disabled]


          iGPU Multi-Monitor [Disabled]

          Set this item to [Enabled] to empower both integrated and discrete graphics for

          multiple-monitor output. The iGPU shared system memory size will be fixed at 64MB.

          Configuration options: [Disabled] [Enabled]