3 Replies Latest reply on Jan 8, 2018 12:47 AM by Intel Corporation

    Using QCU to config 4x10G on XL710-QDA2: QSFP+ Configuration modification is not supported by this adapter.

    Chinabanker

      It takes us more than one week to fix this problem, but failed. Our server is built as belows

       

      Motherboard: Intel S2600CW2R

      CPU: E5 2660 V4

      Network Adapter: XL710-QDA2

      OS: Linux Ubuntu 16.04

       

      We are using Intel QSFP Configuration Utility to config ports as 4x10G mode. All NVMs and drivers have been updated to the latest version. Here are the details of our log file. Anybody could give us some help? Thanks in advance.

       

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ./qcu64e /DEVICES

      [sudo] password for tb-user:

      Intel(R) QSFP+ Configuration Utility

       

      QCU version: v2.27.10.01

      Copyright(C) 2016 by Intel Corporation.

      Software released under Intel Proprietary License.

       

      NIC Seg:Bus Ven-Dev   Mode    Adapter Name

      === ======= ========= ======= ==================================================

      1) 000:004 8086-1583 N/A     Intel(R) Ethernet Converged Network Adapter XL710-

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ./qcu64e /NIC=1 /set=4x10

      Intel(R) QSFP+ Configuration Utility

       

      QCU version: v2.27.10.01

      Copyright(C) 2016 by Intel Corporation.

      Software released under Intel Proprietary License.

       

      QSFP+ Configuration modification is not supported by this adapter.

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ ifconfig -a

      enp1s0f0  Link encap:Ethernet  HWaddr a4:bf:01:1b:89:9e

                inet addr:150.236.28.199  Bcast:150.236.28.223  Mask:255.255.255.224

                inet6 addr: fe80::5622:3a76:5c53:30f4/64 Scope:Link

                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

                RX packets:4079 errors:0 dropped:0 overruns:0 frame:0

                TX packets:322 errors:0 dropped:0 overruns:0 carrier:0

                collisions:0 txqueuelen:1000

                RX bytes:472072 (472.0 KB)  TX bytes:38743 (38.7 KB)

                Memory:91920000-9193ffff

       

      enp1s0f1  Link encap:Ethernet  HWaddr a4:bf:01:1b:89:9f

                UP BROADCAST MULTICAST  MTU:1500  Metric:1

                RX packets:0 errors:0 dropped:0 overruns:0 frame:0

                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

                collisions:0 txqueuelen:1000

                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

                Memory:91900000-9191ffff

       

      ens261f0  Link encap:Ethernet  HWaddr 00:16:f6:f6:10:0a

                UP BROADCAST MULTICAST  MTU:1500  Metric:1

                RX packets:0 errors:0 dropped:0 overruns:0 frame:0

                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

                collisions:0 txqueuelen:1000

                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

       

      ens261f1  Link encap:Ethernet  HWaddr 00:16:f6:f6:10:0b

                UP BROADCAST MULTICAST  MTU:1500  Metric:1

                RX packets:0 errors:0 dropped:0 overruns:0 frame:0

                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

                collisions:0 txqueuelen:1000

                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

       

      lo        Link encap:Local Loopback

                inet addr:127.0.0.1  Mask:255.0.0.0

                inet6 addr: ::1/128 Scope:Host

                UP LOOPBACK RUNNING  MTU:65536  Metric:1

                RX packets:138 errors:0 dropped:0 overruns:0 frame:0

                TX packets:138 errors:0 dropped:0 overruns:0 carrier:0

                collisions:0 txqueuelen:1000

                RX bytes:12084 (12.0 KB)  TX bytes:12084 (12.0 KB)

       

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ethtool ens3f2

      Settings for ens3f2:

      Cannot get device settings: No such device

      Cannot get wake-on-lan settings: No such device

      Cannot get message level: No such device

      Cannot get link status: No such device

      No data available

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ethtool ens261f0

      Settings for ens261f0:

              Supported ports: [ ]

              Supported link modes:   40000baseCR4/Full

                                      40000baseSR4/Full

                                      40000baseLR4/Full

              Supported pause frame use: Symmetric

              Supports auto-negotiation: Yes

              Advertised link modes:  40000baseCR4/Full

              Advertised pause frame use: No

              Advertised auto-negotiation: Yes

              Speed: Unknown!

              Duplex: Unknown! (255)

              Port: Other

              PHYAD: 0

              Transceiver: external

              Auto-negotiation: off

              Supports Wake-on: g

              Wake-on: g

              Current message level: 0x00000007 (7)

                                     drv probe link

              Link detected: no

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ethtool ens261f1

      Settings for ens261f1:

              Supported ports: [ ]

              Supported link modes:   40000baseCR4/Full

                                      40000baseSR4/Full

                                      40000baseLR4/Full

              Supported pause frame use: Symmetric

              Supports auto-negotiation: Yes

              Advertised link modes:  40000baseCR4/Full

              Advertised pause frame use: No

              Advertised auto-negotiation: Yes

              Speed: Unknown!

              Duplex: Unknown! (255)

              Port: Other

              PHYAD: 0

              Transceiver: external

              Auto-negotiation: off

              Supports Wake-on: g

              Wake-on: g

              Current message level: 0x00000007 (7)

                                     drv probe link

              Link detected: no

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ lspci | grep Ethernet

      01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)

      01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)

      04:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)

      04:00.1 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)

      tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$