2 Replies Latest reply on Mar 17, 2010 1:24 PM by hisco

    DP43TF board doesn't boot with Promise Fastrack2605 RAID controller

    hisco

      HiI just built new system with DP43TF with Promise Raid Controller.  When Raid drives are not activated or disconnected from RAID controller, system boots up fine.  However, once 2 drives are connected and configured as RAID 1, system hangs after detecting RAID controller BIOS and won't let me do anything.

      And, from windows, if you connect raid drive back, the RAID works fine.

       

      Is there any workaround way to resolve this issue.