Thank you for the update. Just to double check if you are referring using Dell OEM X710? The firmware version you have is different. Have you tried contacting Dell* to check with them as well?
Please feel free to provide me more information about your setup and NIC information.
What is the serial number of your X710, please look for the serial# on the physical NIC with the format of 16 alphanumeric + 6 alphanumeric + 6 digits -3 digits
Looking forward to your reply.
I am sorry, but I can not find the serial-number in any interface I have access to (ESXi, DRAC)
I have no access to the hardware at the moment and can not take a physical look on the NIC.
This is all information I can get out about the NIC:
Integrated NIC 1 Port 1 Partition 1 - PCI Device
BusNumber 1 DataBusWidth Unknown Description Ethernet 10G 4P X710/I350 rNDC Device Type PCIDevice DeviceDescription Integrated NIC 1 Port 1 Partition 1 DeviceNumber 0 FQDD NIC.Integrated.1-1-1 FunctionNumber 0 InstanceID NIC.Integrated.1-1-1 LastSystemInventoryTime 2017-09-20T10:47:27 LastUpdateTime 2017-09-08T10:12:28 Manufacturer Intel Corporation PCIDeviceID 1572 PCISubDeviceID 1F99 PCISubVendorID 1028 PCIVendorID 8086 SlotLength Unknown SlotType
Linkstatus Up Link-Geschwindigkeit 10 Gbps Betriebssystem-Treiberzustand Operational Automatische Verhandlung Disabled
MAC-Adressen 24:6E:96:4D:30:84 Virtuelle MAC-Adressen 24:6E:96:4D:30:84
Familien-Firmware-Version 18.0.17 Familien-Treiberversion 18.104.22.168 PCI-Geräte-ID 1572
Thank you for the information. This is an OEM NIC and the firmware version is very different, I would recommend you to contact Dell* for customized driver which might be of help.
Yes, I am in contact with DELL.
They have replaced my Intel rNDC NIC with one from QLogic (Broadcom).
We are testing this for two weeks and will replace all NICs if the tests could be passed without issues!
I will keep you up to date about the results.