I'm using all recommended settings including "MHT" as shown in attached snap
also if you check the attachment in the first message you will find that the first line in advanced options says
"802.11n channel width"
it doesn't identify itself as 802.11ac capable adapter regardless of router setup or anything else
however my router is Asus ACRH-RT13 and i am connected to 5.2 GHZ chanel
Magrody, thank you for patience.
Please try to set a fixed channel at router level. Like for example 136 for 5 GHz, for this you will need to check with ASUS how to achieve this. All settings are correct and it should get up to 867 Mbps with that configuration. We believe that there are environmental details that are no allowing to get up to that speed and probably more networks sharing the same channel.
amy, no problem
but if this is the case it doesn't explain why the wifi adapter driver reads "802.11n"
if it was environment it would connect at a low speed but states "802.11ac"
don't you think?
ok you win
the old router was still running and turning it off solved the problem
it was on 2.4 GHZ so i assumed it can never interfer
now i am getting varied performance ranging from 300 and up to 700 Mbps
is there any recommendation for settings in adapter or router other than this page:
also it changes alot through the range between 300 and 700 without changing anything
why do you think that happens?
thanks for your help