1 Reply Latest reply on Aug 30, 2017 3:58 PM by Intel Corporation

    I217-V WOL in L2-L3 Help with configuration

    I217-V

      Good Morning,

      we have implement in our Cisco Network infrastructure this

       

      Catalyst Layer 3 Switch for Wake-On-LAN Support Across VLANs Configuration Example

      Catalyst Layer 3 Switch for Wake-On-LAN Support Across VLANs Configuration Example - Cisco

       

      I've tested the configuration and it's working for example with Realtek Network Card without problem.

       

      Right now I'm able to WOL only with DIRECT connection from a computer to another connect with a RJ45 cable related to I217-V network card

       

      With Wire Shark I've verified and the magic packet it's correctly delivered to the end point.

       

      is there someone that can help me with that ? since the moment that computer it's new I think is possible to achive that.  For sure bios it's enable maybe there are parameters that I'm not considering right now.

       

      in attachment there is the full log obtained with SSU but I report to you the information related to network card:

       

      Availability Running or Full Power

      Caption Intel(R) Ethernet Connection I217-V http://www.intel.com/content/www/us/en/search.html?keyword=Ethernet+Connection+I217+V

      CoInstallers NicCo36.dll,NicCoInstallerEntry

      Default IP Gateway 10.44.1.1

      DHCP Enabled Yes

      DHCP Lease Expires 09/29/2017 10:38 AM

      DHCP Lease Obtained 08/30/2017 10:38 AM

      DHCP Server 10.100.200.34

      Driver e1d62x64.sys

      Driver Date 05/03/2014 12:00 AM

      Driver Path C:\WINDOWS\system32\DRIVERS\e1d62x64.sys

      Driver Provider Intel

      Driver Version 12.11.77.1

      ETrackID Not Available

      Index 0007

      INF oem183.inf

      INF Section E153B.6.1.1

      Install Date Not Available

      Installed Yes

      IP Address 10.44.1.58;fe80::dfb:d2d1:6f09:6b96

      IP Subnet 255.255.255.0;64

      Last Error Code Not Available

      Last Error Code Description Not Available

      Last Reset 08/28/2017 10:47 AM

      Location PCI bus 0, device 25, function 0

      MAC Address E4:7F:B2:1A:29:0E

      Manufacturer Intel

      Media Type

      Net Connection ID Local Area Connection

      NetCfgInstanceId {23EE3DDC-C992-4883-BC04-8F777463CE77}

      Number of VLANs 0

      NVM Version Not Available

      Part Number FFFFFF-0FF

      PNP Device ID PCI\VEN_8086&DEV_153B&SUBSYS_17E810CF&REV_04\3&11583659&0&C8

      Port Not Available

      Power Management (Low Power) Active: Yes, Enable: No

      Power Management (Wake On LAN) Active: Yes, Enable: No

      Power Management (Wake on Magic Packet) Active: Yes, EnableWakeOnMagicPacketOnly: No

      Power Management Capabilities Not Available

      Power Management Supported No

      Product Type Intel(R) Ethernet Connection I217-V

      Service Name e1dexpress

      Status Enabled

      Team Name Not in a team

      Temperature

      Type Ethernet 802.3

       

      AND SETTINGS:

       

      *FlowControl Flow Control Rx & Tx Enabled (3)

      *InterruptModeration Interrupt Moderation Enabled (1)

      *IPChecksumOffloadIPv4 IPv4 Checksum Offload Rx & Tx Enabled (3)

      *JumboPacket Jumbo Packet Disabled (1514)

      *LsoV2IPv4 Large Send Offload V2 (IPv4) Enabled (1)

      *LsoV2IPv6 Large Send Offload V2 (IPv6) Enabled (1)

      *PMARPOffload Protocol ARP Offload Enabled (1)

      *PMNSOffload Protocol NS Offload Enabled (1)

      *PriorityVLANTag Priority & VLAN Priority & VLAN Enabled (3)

      *ReceiveBuffers Receive Buffers 256 (256)

      *RSS Receive Side Scaling Enabled (1)

      *SpeedDuplex Speed & Duplex Auto Negotiation (0)

      *TCPChecksumOffloadIPv4 TCP Checksum Offload (IPv4) Rx & Tx Enabled (3)

      *TCPChecksumOffloadIPv6 TCP Checksum Offload (IPv6) Rx & Tx Enabled (3)

      *TransmitBuffers Transmit Buffers 512 (512)

      *UDPChecksumOffloadIPv4 UDP Checksum Offload (IPv4) Rx & Tx Enabled (3)

      *UDPChecksumOffloadIPv6 UDP Checksum Offload (IPv6) Rx & Tx Enabled (3)

      *WakeOnMagicPacket Wake on Magic Packet Enabled (1)

      *WakeOnPattern Wake on Pattern Match Enabled (1)

      AdaptiveIFS Adaptive Inter-Frame Spacing Disabled (0)

      AutoPowerSaveModeEnabled Link Speed Battery Saver Disabled (0)

      EEELinkAdvertisement Energy Efficient Ethernet Off (0)

      EnablePME Enable PME Enabled (1)

      ITR Interrupt Moderation Rate Adaptive (65535)

      LogLinkStateEvent Log Link State Event Enabled (51)

      MasterSlave Gigabit Master Slave Mode Auto Detect (0)

      NumRssQueues Receive Side Scaling Queues 1 Queue (1)

      ReduceSpeedOnPowerDown Reduce Speed On Power Down Disabled (0)

      SipsEnabled System Idle Power Saver Disabled (0)

      WaitAutoNegComplete Wait for Link Auto Detect (2)

      WakeOnLink Wake on Link Settings Disabled (0)

       

       

      Is there someone that can help me kindly ?

       

      Thanks

      Andrea