Windows was switched from AHCI to RAID using http://triplescomputers.com/blog/uncategorized/solution-switch-windows-10-from-raidide-to-ahci-operation/ The machine came in AHCI from HP even though I specifically customized it to include an mSATA SSD cache drive.
IRST is working properly in ALL regards EXCEPT when the computer goes to sleep. On a cold boot, IRST reduces my boot time from 6 minutes to 1.5 minutes. Acceleration is ON in Enhanced mode.
The computer runs beautiful if I never let the machine go to sleep. But I do a lot of work where I leave numerous windows open overnight and let the computer sleep to come back to it the next time. I need sleep mode working.
There has to be a solution.
This message was posted on behalf of Intel Corporation
You can try contacting you computer manufacturer to update your motherboard BIOS, also try installing the latest graphics driver that you can download here:
Honestly, this steps that you use to change from AHCI to RAID is not validated by Intel because with the Intel® software we will need to install the operating system in RAID mode or AHCI so if the issue persists there must be some conflict between the IRST and the way the BIOS was configured with those steps.