3 Replies Latest reply on Jul 20, 2017 2:58 PM by Intel Corporation

    Error while booting Intel Edison

    FocaaBR

      Hi there,

      I have an Intel Edison with an extension board to communicate with another device via zigbee. This week when I tried to boot the board I got some errors and after some manually reboots I'm having these messages and the board is rebooting unstoppable. I want to know what I can do to fix this.

      PS: I tried to supply via USB (PC Port) and via cellphone charger.

       

      GADGET DRIVER: usb_dnl_dfu

      reading vmlinuz

      5299520 bytes read in 131 ms (38.6 MiB/s)

      Valid Boot Flag

      Setup Size = 0x00003c00

      Magic signature found

      Using boot protocol version 2.0c

      Linux kernel version 3.10.17-yocto-standard-r2 (root@p32mac) #7 SMP PREEMPT Thu                                                                                                                                                              Feb 26 09:57:06 UTC 2015

      Building boot_params at 0x00090000

      Loading bzImage at address 00100000 (5284160 bytes)

      Magic signature found

      Kernel command line: "root=/dev/mmcblk1p1 rootdelay=3 rootfstype=ext4 console=tt                                                                                                                                                             yMFD2 earlyprintk=ttyMFD2,keep loglevel=4 systemd.unit=first-install.target hard                                                                                                                                                             ware_id=00 g_multi.iSerialNumber=bb559091645a234f7cbbf68f3f652005 g_multi.dev_ad                                                                                                                                                             dr=02:00:86:65:20:05"

       

       

      Starting kernel ...

       

       

      [    0.748048] pca953x 1-0020: failed reading register

      [    0.753198] pca953x 1-0021: failed reading register

      [    0.753615] pca953x 1-0022: failed reading register

      [    0.763144] pca953x 1-0023: failed reading register

      [    1.646309] pmic_ccsm pmic_ccsm: Error reading battery profile from battid fr                                                                                                                                                             mwrk

      [    1.654990] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

       

       

       

       

      ******************************

      PSH KERNEL VERSION: b0182929

                      WR: 20104000

      ******************************

       

       

      SCU IPC: 0x800000d0  0xfffce92c

       

       

      PSH miaHOB version: TNG.B0.VVBD.0000000c

       

       

      microkernel built 10:14:01 Jan 13 2015

       

       

      ******* PSH loader *******

      PCM page cache size = 192 KB

      Cache Constraint = 0 Pages

      Arming IPC driver ..

      Adding page store pool ..

      PagestoreAddr(IMR Start Address) = 0x04899000

      pageStoreSize(IMR Size)          = 0x00080000

       

       

      *** Ready to receive application ***

       

       

       

       

      U-Boot 2014.04 (Feb 09 2015 - 15:40:31)

       

       

             Watchdog enabled

      DRAM:  980.6 MiB

      MMC:   tangier_sdhci: 0

      In:    serial

      Out:   serial

      Err:   serial

      Hit any key to stop autoboot:  0

      Target:blank

      Partitioning already done...

      Flashing already done...

      GADGET DRIVER: usb_dnl_dfu

      reading vmlinuz

      5299520 bytes read in 131 ms (38.6 MiB/s)

      Valid Boot Flag

      Setup Size = 0x00003c00

      Magic signature found

      Using boot protocol version 2.0c

      Linux kernel version 3.10.17-yocto-standard-r2 (root@p32mac) #7 SMP PREEMPT Thu Feb 26 09:57:06 UTC 2015

      Building boot_params at 0x00090000

      Loading bzImage at address 00100000 (5284160 bytes)

      Magic signature found

      Kernel command line: "root=/dev/mmcblk1p1 rootdelay=3 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 systemd.unit=first-install.target hardware_id=00 g_multi.iSerialNumber=bb559091645a234f7cbbf68f3f652005 g_multi.dev_addr=02:00:86:65:20:05"

       

       

      Starting kernel ...

       

       

      [    0.748622] pca953x 1-0020: failed reading register

      [    0.753857] pca953x 1-0021: failed reading register

      [    0.754263] pca953x 1-0022: failed reading register

      [    0.763791] pca953x 1-0023: failed reading register

      [    1.656708] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk

      [    1.665690] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

      [    1.674009] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary