2 Replies Latest reply on Jul 20, 2017 10:19 AM by Intel Corporation

    VGA No Signal Problem


      Operating System: Windows XP; Graphics Driver: Intel(r) Graphics Media Accelerator; Monitor Connected: 1 using VGA & another one using LVDS; On Power on both the monitors are working  normally. Now after powering off the CPU I  disconnected the VGA cable and powered on the CPU. Cable Not Connected was displayed in the monitor (as usual). After shutting down the CPU I reconnected the VGA cable. I powered on the CPU but nothing was displayed on the monitor. It displayed No signal... After more troubleshooting I noticed that the Operating Mode in the Intel(r) Graphics Media Accelerator is changing from "Twin" to "Single Display" every time I disconnected the VGA cable.. Can anyone help me out in this issue...