4 Replies Latest reply on Jul 7, 2017 2:14 PM by Intel Corporation

    Error trying to use Openocd with OLIMEX_ARM_USB_OCD_H and Intel Galileo Gen2

    HoracioMerovich

      I am trying to test source level debugging with a OLimex ARM-USB-OCD-H jtag adapter and my Intel Galileo Gen 2 board but when i try to start openocd I get

       

      openocd -f /usr/share/openocd/scripts/interface/ftdi/olimex_arm_usb_ocd_h.cfg -f /usr/share/openocd/scripts/board/quark_x10xx,board.cfg

       

      Open On_Chip Debugger 0.8.0 (2017-06-26-22:51)

      Licensed under GNU GPL v2

       

      Info: only one transport option: autoselect 'jtag'

      adapter speed: 4000 kHz

      trst_only separate trst_push_pull

      Info: clock speed 4000 kHz

      Info: JTAG tap;quark_x10xx.cltap tap/device found 0x0e681013 (mfg:0x009,port:0xe681, ver: 0x0)

      Error: quark_x10xx.cltap: IR capture error: saw 0xff not0x1

      Warn: Bypassing JATG setup events due to error

       

       

      Pls can you help me to solve the problem?

       

      Best regards and thanks in advance